[PATCH v1 1/2] arm64: dts: freescale: imx8mm-verdin: don't limit i2c2 max. clock

[max.oss.09 at gmail.com]

From: Max Krummenacher <max.krummenacher at toradex.com>

Verdin I2C2 may be used to access other I2C devices apart from serving
as an HDMI DDC channel.
Thus do not limit the used I2C clock frequency to 10kHz in the module
specific device tree part.
If an overlay configures i2c2 as DDC the overlay is also responsible
to cope with an appropriate I2C clock.

Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
---

 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 4768b05fd765..82bbcec525d7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -547,7 +547,7 @@ eeprom at 50 {
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-- 
2.42.0