[PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label

Frank Li Frank.li at nxp.com
Wed May 8 20:36:48 PDT 2024


On Thu, May 09, 2024 at 09:57:08AM +0800, Joy Zou wrote:
> Reorder lpi2c2 and lpi2c3 label in alphabetical order.
> 
> Signed-off-by: Joy Zou <joy.zou at nxp.com>

Reviewed-by: Frank Li <Frank.Li at nxp.com>

> ---
>  .../boot/dts/freescale/imx93-11x11-evk.dts    | 217 +++++++++---------
>  1 file changed, 105 insertions(+), 112 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index d400d85f42a9..6be1eb920c02 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -105,6 +105,104 @@ &mu2 {
>  	status = "okay";
>  };
>  
> +&lpi2c2 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&pinctrl_lpi2c2>;
> +	pinctrl-1 = <&pinctrl_lpi2c2>;
> +	status = "okay";
> +
> +	pcal6524: gpio at 22 {
> +		compatible = "nxp,pcal6524";
> +		reg = <0x22>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pcal6524>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	pmic at 25 {
> +		compatible = "nxp,pca9451a";
> +		reg = <0x25>;
> +		interrupt-parent = <&pcal6524>;
> +		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> +
> +		regulators {
> +			buck1: BUCK1 {
> +				regulator-name = "BUCK1";
> +				regulator-min-microvolt = <610000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			buck2: BUCK2 {
> +				regulator-name = "BUCK2";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <670000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			buck4: BUCK4{
> +				regulator-name = "BUCK4";
> +				regulator-min-microvolt = <1620000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck5: BUCK5{
> +				regulator-name = "BUCK5";
> +				regulator-min-microvolt = <1620000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck6: BUCK6 {
> +				regulator-name = "BUCK6";
> +				regulator-min-microvolt = <1060000>;
> +				regulator-max-microvolt = <1140000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1: LDO1 {
> +				regulator-name = "LDO1";
> +				regulator-min-microvolt = <1620000>;
> +				regulator-max-microvolt = <1980000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo4: LDO4 {
> +				regulator-name = "LDO4";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <840000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo5: LDO5 {
> +				regulator-name = "LDO5";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
>  &lpi2c3 {
>  	#address-cells = <1>;
>  	#size-cells = <0>;
> @@ -113,6 +211,13 @@ &lpi2c3 {
>  	pinctrl-0 = <&pinctrl_lpi2c3>;
>  	status = "okay";
>  
> +	pcf2131: rtc at 53 {
> +		compatible = "nxp,pcf2131";
> +		reg = <0x53>;
> +		interrupt-parent = <&pcal6524>;
> +		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> +	};
> +
>  	ptn5110: tcpc at 50 {
>  		compatible = "nxp,ptn5110", "tcpci";
>  		reg = <0x50>;
> @@ -304,118 +409,6 @@ &wdog3 {
>  	status = "okay";
>  };
>  
> -&lpi2c2 {
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	clock-frequency = <400000>;
> -	pinctrl-names = "default", "sleep";
> -	pinctrl-0 = <&pinctrl_lpi2c2>;
> -	pinctrl-1 = <&pinctrl_lpi2c2>;
> -	status = "okay";
> -
> -	pcal6524: gpio at 22 {
> -		compatible = "nxp,pcal6524";
> -		reg = <0x22>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_pcal6524>;
> -		gpio-controller;
> -		#gpio-cells = <2>;
> -		interrupt-controller;
> -		#interrupt-cells = <2>;
> -		interrupt-parent = <&gpio3>;
> -		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> -	};
> -
> -	pmic at 25 {
> -		compatible = "nxp,pca9451a";
> -		reg = <0x25>;
> -		interrupt-parent = <&pcal6524>;
> -		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> -
> -		regulators {
> -			buck1: BUCK1 {
> -				regulator-name = "BUCK1";
> -				regulator-min-microvolt = <610000>;
> -				regulator-max-microvolt = <950000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -				regulator-ramp-delay = <3125>;
> -			};
> -
> -			buck2: BUCK2 {
> -				regulator-name = "BUCK2";
> -				regulator-min-microvolt = <600000>;
> -				regulator-max-microvolt = <670000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -				regulator-ramp-delay = <3125>;
> -			};
> -
> -			buck4: BUCK4{
> -				regulator-name = "BUCK4";
> -				regulator-min-microvolt = <1620000>;
> -				regulator-max-microvolt = <3400000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			buck5: BUCK5{
> -				regulator-name = "BUCK5";
> -				regulator-min-microvolt = <1620000>;
> -				regulator-max-microvolt = <3400000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			buck6: BUCK6 {
> -				regulator-name = "BUCK6";
> -				regulator-min-microvolt = <1060000>;
> -				regulator-max-microvolt = <1140000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			ldo1: LDO1 {
> -				regulator-name = "LDO1";
> -				regulator-min-microvolt = <1620000>;
> -				regulator-max-microvolt = <1980000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			ldo4: LDO4 {
> -				regulator-name = "LDO4";
> -				regulator-min-microvolt = <800000>;
> -				regulator-max-microvolt = <840000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -
> -			ldo5: LDO5 {
> -				regulator-name = "LDO5";
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-boot-on;
> -				regulator-always-on;
> -			};
> -		};
> -	};
> -};
> -
> -&lpi2c3 {
> -	clock-frequency = <400000>;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_lpi2c3>;
> -	status = "okay";
> -
> -	pcf2131: rtc at 53 {
> -		compatible = "nxp,pcf2131";
> -		reg = <0x53>;
> -		interrupt-parent = <&pcal6524>;
> -		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> -	};
> -};
> -
>  &iomuxc {
>  	pinctrl_eqos: eqosgrp {
>  		fsl,pins = <
> -- 
> 2.37.1
> 



More information about the linux-arm-kernel mailing list