[PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label

Joy Zou joy.zou at nxp.com
Wed May 8 18:57:08 PDT 2024


Reorder lpi2c2 and lpi2c3 label in alphabetical order.

Signed-off-by: Joy Zou <joy.zou at nxp.com>
---
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 217 +++++++++---------
 1 file changed, 105 insertions(+), 112 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index d400d85f42a9..6be1eb920c02 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -105,6 +105,104 @@ &mu2 {
 	status = "okay";
 };
 
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio at 22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic at 25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &lpi2c3 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -113,6 +211,13 @@ &lpi2c3 {
 	pinctrl-0 = <&pinctrl_lpi2c3>;
 	status = "okay";
 
+	pcf2131: rtc at 53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
 	ptn5110: tcpc at 50 {
 		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x50>;
@@ -304,118 +409,6 @@ &wdog3 {
 	status = "okay";
 };
 
-&lpi2c2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-frequency = <400000>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_lpi2c2>;
-	pinctrl-1 = <&pinctrl_lpi2c2>;
-	status = "okay";
-
-	pcal6524: gpio at 22 {
-		compatible = "nxp,pcal6524";
-		reg = <0x22>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcal6524>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	pmic at 25 {
-		compatible = "nxp,pca9451a";
-		reg = <0x25>;
-		interrupt-parent = <&pcal6524>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			buck1: BUCK1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <610000>;
-				regulator-max-microvolt = <950000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-			};
-
-			buck2: BUCK2 {
-				regulator-name = "BUCK2";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <670000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-			};
-
-			buck4: BUCK4{
-				regulator-name = "BUCK4";
-				regulator-min-microvolt = <1620000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck5: BUCK5{
-				regulator-name = "BUCK5";
-				regulator-min-microvolt = <1620000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck6: BUCK6 {
-				regulator-name = "BUCK6";
-				regulator-min-microvolt = <1060000>;
-				regulator-max-microvolt = <1140000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1: LDO1 {
-				regulator-name = "LDO1";
-				regulator-min-microvolt = <1620000>;
-				regulator-max-microvolt = <1980000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4: LDO4 {
-				regulator-name = "LDO4";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <840000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo5: LDO5 {
-				regulator-name = "LDO5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&lpi2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpi2c3>;
-	status = "okay";
-
-	pcf2131: rtc at 53 {
-		compatible = "nxp,pcf2131";
-		reg = <0x53>;
-		interrupt-parent = <&pcal6524>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
 &iomuxc {
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
-- 
2.37.1




More information about the linux-arm-kernel mailing list