[PATCH 22/23] drivers: media: i2c: imx258: Add support for powerdown gpio

[Luigi311]

On 3/28/24 14:48, Rob Herring wrote:
> On Wed, Mar 27, 2024 at 05:17:08PM -0600, git at luigi311.com wrote:
>> From: Luigi311 <git at luigi311.com>
>>
>> On some boards powerdown signal needs to be deasserted for this
>> sensor to be enabled.
>>
>> Signed-off-by: Ondrej Jirman <megi at xff.cz>
>> ---
>>  .../devicetree/bindings/media/i2c/sony,imx258.yaml  |  4 ++++
> 
> Bindings should be a separate patch.
> 

Ok ill create separate patch for adding in the binding and then
a follow up patch with the other half that actually adds it to
the driver

>>  drivers/media/i2c/imx258.c                          | 13 +++++++++++++
>>  2 files changed, 17 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
>> index c7856de15ba3..0414085bf22f 100644
>> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
>> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
>> @@ -35,6 +35,10 @@ properties:
>>    reg:
>>      maxItems: 1
>>  
>> +  powerdown-gpios:
>> +    description: |-
> 
> Don't need '|-' if no formatting> 

Done

>> +      Reference to the GPIO connected to the PWDN pin, if any.
>> +
>>    reset-gpios:
>>      description: |-
>>        Reference to the GPIO connected to the XCLR pin, if any.