[PATCH 22/23] drivers: media: i2c: imx258: Add support for powerdown gpio

[Rob Herring]

On Wed, Mar 27, 2024 at 05:17:08PM -0600, git at luigi311.com wrote:
> From: Luigi311 <git at luigi311.com>
> 
> On some boards powerdown signal needs to be deasserted for this
> sensor to be enabled.
> 
> Signed-off-by: Ondrej Jirman <megi at xff.cz>
> ---
>  .../devicetree/bindings/media/i2c/sony,imx258.yaml  |  4 ++++

Bindings should be a separate patch.

>  drivers/media/i2c/imx258.c                          | 13 +++++++++++++
>  2 files changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
> index c7856de15ba3..0414085bf22f 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
> @@ -35,6 +35,10 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  powerdown-gpios:
> +    description: |-

Don't need '|-' if no formatting.

> +      Reference to the GPIO connected to the PWDN pin, if any.
> +
>    reset-gpios:
>      description: |-
>        Reference to the GPIO connected to the XCLR pin, if any.