[PATCH 2/2] arm64: dts: ti: k3-am65: Move SerDes mux nodes under the control node

[Andrew Davis]

These SerDes lane select muxes use bits from the same register as
the SerDes clock select mux. Make the lane select mux a child
of the SerDes control node.

This removes one more requirement on scm-conf being a syscon node
which will later be converted to fix a couple DTS check warnings.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 738c5c4acbcd2..5ce67e6a33600 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -66,7 +66,7 @@ serdes0: serdes at 900000 {
 		assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
 		ti,serdes-clk = <&serdes0_clk>;
 		#clock-cells = <1>;
-		mux-controls = <&serdes_mux 0>;
+		mux-controls = <&serdes0_mux 0>;
 	};
 
 	serdes1: serdes at 910000 {
@@ -81,7 +81,7 @@ serdes1: serdes at 910000 {
 		assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
 		ti,serdes-clk = <&serdes1_clk>;
 		#clock-cells = <1>;
-		mux-controls = <&serdes_mux 1>;
+		mux-controls = <&serdes1_mux 0>;
 	};
 
 	main_uart0: serial at 2800000 {
@@ -485,18 +485,23 @@ scm_conf: scm-conf at 100000 {
 		serdes0_clk: clock at 4080 {
 			compatible = "ti,am654-serdes-ctrl", "syscon";
 			reg = <0x4080 0x4>;
+
+			serdes0_mux: mux-controller {
+				compatible = "mmio-mux";
+				#mux-control-cells = <1>;
+				mux-reg-masks = <0x0 0x3>; /* lane select */
+			};
 		};
 
 		serdes1_clk: clock at 4090 {
 			compatible = "ti,am654-serdes-ctrl", "syscon";
 			reg = <0x4090 0x4>;
-		};
 
-		serdes_mux: mux-controller {
-			compatible = "mmio-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
-					<0x4090 0x3>; /* SERDES1 lane select */
+			serdes1_mux: mux-controller {
+				compatible = "mmio-mux";
+				#mux-control-cells = <1>;
+				mux-reg-masks = <0x0 0x3>; /* lane select */
+			};
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl at 41e0 {
-- 
2.39.2