[PATCH v4 2/6] arm64: dts: ti: k3-j784s4: Add alias to MCU CPSW2G

[Andrew Davis]

On 3/11/24 5:44 AM, Chintan Vankar wrote:
> 
> 
> On 31/01/24 21:06, Andrew Davis wrote:
>> On 1/31/24 4:14 AM, Chintan Vankar wrote:
>>> Add alias for the MCU CPSW2G port to enable Linux to fetch MAC Address
>>> for the port directly from U-Boot.
>>
>> Could you explain *how* this alias allows Linux to fetch a MAC
>> address from U-Boot? Sounds like we are doing something hacky here..
>>
> Using "probe_daughtercards()" function U-Boot parses MAC addresses from
> EEPROM, then it internally calls "eth_env_set_enetaddr_by_index()"
> function which stores these MAC addresses into environment variables
> ethaddr, eth1addr, eth2addr and so on based on number of ports.
> 
> U-Boot loads DTB during boot process, and it calls
> "fdt_fixup_ethernet()" function, which uses environment variables to
> update MAC addresses of ethernet ports as specified in the aliases
> section.
> 

So maybe a better question would by why does it need to use aliases
for this?

>> Why can't Linux fetch the MAC from efuses the same way U-Boot does,
> 
> Linux can fetch the MAC address from efuses if "ti,syscon-efuse"
> property is enabled.
> 

Then let's do it this way always.

>> what happens if I don't use U-Boot to boot?
> 
> If you don't use U-Boot to boot then the equivalent of
> "probe_daughtercards()" has to be implemented which is currently
> missing.
> 

Or we just let Linux fetch it instead of implementing that function
in all the possible bootloaders. This would also remove a DTB fixup.
Those fixups should be avoided if at all possible.

Andrew

>>
>> Andrew
>>
>>> ---
>>>   arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> index f34b92acc56d..b74f7d3025de 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> @@ -27,6 +27,7 @@ aliases {
>>>           mmc1 = &main_sdhci1;
>>>           i2c0 = &wkup_i2c0;
>>>           i2c3 = &main_i2c0;
>>> +        ethernet0 = &mcu_cpsw_port1;
>>>       };
>>>       memory at 80000000 {