[PATCH v4 2/6] arm64: dts: ti: k3-j784s4: Add alias to MCU CPSW2G

[Chintan Vankar]

On 31/01/24 21:06, Andrew Davis wrote:
> On 1/31/24 4:14 AM, Chintan Vankar wrote:
>> Add alias for the MCU CPSW2G port to enable Linux to fetch MAC Address
>> for the port directly from U-Boot.
> 
> Could you explain *how* this alias allows Linux to fetch a MAC
> address from U-Boot? Sounds like we are doing something hacky here..
> 
Using "probe_daughtercards()" function U-Boot parses MAC addresses from
EEPROM, then it internally calls "eth_env_set_enetaddr_by_index()"
function which stores these MAC addresses into environment variables
ethaddr, eth1addr, eth2addr and so on based on number of ports.

U-Boot loads DTB during boot process, and it calls
"fdt_fixup_ethernet()" function, which uses environment variables to
update MAC addresses of ethernet ports as specified in the aliases
section.

> Why can't Linux fetch the MAC from efuses the same way U-Boot does,

Linux can fetch the MAC address from efuses if "ti,syscon-efuse"
property is enabled.

> what happens if I don't use U-Boot to boot?

If you don't use U-Boot to boot then the equivalent of
"probe_daughtercards()" has to be implemented which is currently
missing.

> 
> Andrew
> 
>> ---
>>   arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts 
>> b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> index f34b92acc56d..b74f7d3025de 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> @@ -27,6 +27,7 @@ aliases {
>>           mmc1 = &main_sdhci1;
>>           i2c0 = &wkup_i2c0;
>>           i2c3 = &main_i2c0;
>> +        ethernet0 = &mcu_cpsw_port1;
>>       };
>>       memory at 80000000 {