[PATCH 1/3] mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
Ciprian Marian Costea
ciprianmarian.costea at oss.nxp.com
Thu Jul 11 07:25:48 PDT 2024
On 7/10/2024 3:34 PM, Adrian Hunter wrote:
> On 8/07/24 15:10, Ciprian Costea wrote:
>> In case of S32G based platforms, GPIO CD used for card detect
>> wake mechanism is not available.
>>
>> For this scenario the newly introduced flag
>> 'ESDHC_FLAG_SKIP_CD_WAKE' is used.
>>
>> Signed-off-by: Ciprian Costea <ciprianmarian.costea at oss.nxp.com>
>
> Should have:
>
> - put the patch set version number (v2) in the subject e.g.
> [PATCH v2 1/3] mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
>
> - added Haibo Chen's Reviewed-by tag
>
> Anyway:
>
> Acked-by: Adrian Hunter <adrian.hunter at intel.com>
>
Hello Adrian,
Sorry for bothering you with this question, but should I send a new
patchset adding the new version or what is the process after this step ?
For example, should I send this patchset again with V3 adding all the
ACKs & Reviewed-by tags to each commit from the patchset ?
Best Regards,
Ciprian
>
>> ---
>> drivers/mmc/host/sdhci-esdhc-imx.c | 8 ++++++--
>> 1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
>> index 40a6e2f8145a..21d984a77be8 100644
>> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
>> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
>> @@ -201,6 +201,9 @@
>> /* ERR004536 is not applicable for the IP */
>> #define ESDHC_FLAG_SKIP_ERR004536 BIT(17)
>>
>> +/* The IP does not have GPIO CD wake capabilities */
>> +#define ESDHC_FLAG_SKIP_CD_WAKE BIT(18)
>> +
>> enum wp_types {
>> ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
>> ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
>> @@ -298,7 +301,7 @@ static struct esdhc_soc_data usdhc_s32g2_data = {
>> .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING
>> | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
>> | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
>> - | ESDHC_FLAG_SKIP_ERR004536,
>> + | ESDHC_FLAG_SKIP_ERR004536 | ESDHC_FLAG_SKIP_CD_WAKE,
>> };
>>
>> static struct esdhc_soc_data usdhc_imx7ulp_data = {
>> @@ -1726,7 +1729,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
>> host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
>>
>> /* GPIO CD can be set as a wakeup source */
>> - host->mmc->caps |= MMC_CAP_CD_WAKE;
>> + if (!(imx_data->socdata->flags & ESDHC_FLAG_SKIP_CD_WAKE))
>> + host->mmc->caps |= MMC_CAP_CD_WAKE;
>>
>> if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
>> host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
>
More information about the linux-arm-kernel
mailing list