[PATCH 04/11] arm64: dts: ti: k3-j7200: Convert usb_serdes_mux node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 50d1f173bde31..e9898d52d83a7 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -48,9 +48,10 @@ cpsw0_phy_gmii_sel: phy at 4044 {
 		};
 
 		usb_serdes_mux: mux-controller at 4000 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
+			reg = <0x4000 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
 		};
 	};
 
-- 
2.39.2