[PATCH v2 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin

[Mathieu Othacehe]

Add DTSI for Phytec i.MX93 System on Module and DTS for Phytec
i.MX93 on Segin evaluation board.

This version comes with:
 - 1GB LPDDR4 RAM
 - external SD
 - debug UART
 - 1x 100Mbit Ethernet

Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../dts/freescale/imx93-phycore-segin.dts     | 93 +++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 64 +++++++++++++
 3 files changed, 158 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2e027675d7bb..f078d6ef75f7 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -201,6 +201,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
new file mode 100644
index 000000000000..748b779a9dc1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phycore-segin", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	status = "okay";
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 000000000000..4edff4a50b2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		ele_reserved: ele-reserved at a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
-- 
2.41.0