[PATCH v3 5/6] arm64: dts: imx93: add usb nodes

[Alexander Stein]

Am Freitag, 12. Januar 2024, 12:17:46 CET schrieb Xu Yang:
> ********************
> Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie wissen,
> dass diese aus einer sicheren Quelle stammen und sicher sind. Leiten Sie
> die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter.
> Attention external email: Open attachments and links only if you know that
> they are from a secure source and are safe. In doubt forward the email to
> the IT-Helpdesk to check it. ********************
> 
> There are 2 USB controllers on i.MX93. Add them.
> 
> Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> 
> ---
> Changes in v2:
>  - fix format as suggested by Alexander
>  - change compatible from fsl,imx8mm-usb to fsl,imx93-usb
> Changes in v3:
>  - replace deprecated fsl,usbphy with phys as suggested by Alexander
>  - reorder nodes
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 58 ++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> b/arch/arm64/boot/dts/freescale/imx93.dtsi index 34c0540276d1..10124758c579
> 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -171,6 +171,20 @@ cm33: remoteproc-cm33 {
>  		status = "disabled";
>  	};
> 
> +	usbphynop1: usbphynop1 {
> +		compatible = "usb-nop-xceiv";
> +		#phy-cells = <0>;
> +		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
> +		clock-names = "main_clk";
> +	};
> +
> +	usbphynop2: usbphynop2 {
> +		compatible = "usb-nop-xceiv";
> +		#phy-cells = <0>;
> +		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
> +		clock-names = "main_clk";
> +	};
> +
>  	soc at 0 {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
> @@ -1054,6 +1068,50 @@ media_blk_ctrl: system-controller at 4ac10000 {
>  			status = "disabled";
>  		};
> 
> +		usbotg1: usb at 4c100000 {
> +			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", 
"fsl,imx27-usb";
> +			reg = <0x4c100000 0x200>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
> +				 <&clk IMX93_CLK_HSIO_32K_GATE>;
> +			clock-names = "usb_ctrl_root_clk", 
"usb_wakeup_clk";
> +			assigned-clocks = <&clk IMX93_CLK_HSIO>;
> +			assigned-clock-parents = <&clk 
IMX93_CLK_SYS_PLL_PFD1_DIV2>;
> +			assigned-clock-rates = <133000000>;
> +			phys = <&usbphynop1>;
> +			fsl,usbmisc = <&usbmisc1 0>;
> +			status = "disabled";
> +		};
> +
> +		usbmisc1: usbmisc at 4c100200 {
> +			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-
usbmisc",
> +					"fsl,imx6q-usbmisc";

Please fix the alignment here.

> +			reg = <0x4c100200 0x200>;
> +			#index-cells = <1>;
> +		};
> +
> +		usbotg2: usb at 4c200000 {
> +			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", 
"fsl,imx27-usb";
> +			reg = <0x4c200000 0x200>;
> +			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
> +				 <&clk IMX93_CLK_HSIO_32K_GATE>;
> +			clock-names = "usb_ctrl_root_clk", 
"usb_wakeup_clk";
> +			assigned-clocks = <&clk IMX93_CLK_HSIO>;
> +			assigned-clock-parents = <&clk 
IMX93_CLK_SYS_PLL_PFD1_DIV2>;
> +			assigned-clock-rates = <133000000>;
> +			phys = <&usbphynop2>;
> +			fsl,usbmisc = <&usbmisc2 0>;
> +			status = "disabled";
> +		};
> +
> +		usbmisc2: usbmisc at 4c200200 {
> +			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-
usbmisc",
> +					"fsl,imx6q-usbmisc";

Please fix the alignment here as well.
With both changes applied:

Acked-by: Alexander Stein <alexander.stein at ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com> # TQMa9352LA/CA

> +			reg = <0x4c200200 0x200>;
> +			#index-cells = <1>;
> +		};
> +
>  		ddr-pmu at 4e300dc0 {
>  			compatible = "fsl,imx93-ddr-pmu";
>  			reg = <0x4e300dc0 0x200>;


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/