[PATCH] ARM: dts: imx6: fix IRQ config of RC5T619

[Andreas Kemnade]

Set interrupt type to level low to correctly describe the hardware and
do not rely on the driver to do the right thing.

Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
---
 arch/arm/boot/dts/nxp/imx/e60k02.dtsi                | 2 +-
 arch/arm/boot/dts/nxp/imx/e70k02.dtsi                | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
index dd03e3860f97f..13756d39fb7b9 100644
--- a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
@@ -127,7 +127,7 @@ ricoh619: pmic at 32 {
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
index 4e1bf080eaca0..dcc3c9d488a88 100644
--- a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
@@ -145,7 +145,7 @@ ricoh619: pmic at 32 {
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 922749bf11bc1..04027627fe62b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -161,7 +161,7 @@ ricoh619: pmic at 32 {
 		pinctrl-0 = <&pinctrl_ricoh_gpio>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
-- 
2.39.2