[PATCH] ARM: dts: imx6sl: tolino-shine2hd: fix IRQ config of touchscreen

[Andreas Kemnade]

Correctly describe the interrupt as level low. Driver enforces that
anyways, but do not rely on that in the devicetree.

Suggested-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
---
 arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 815119c12bd48..922749bf11bc1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -138,7 +138,7 @@ zforce: touchscreen at 50 {
 		pinctrl-0 = <&pinctrl_zforce>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&ldo1_reg>;
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 		x-size = <1072>;
-- 
2.39.2