[PATCH 08/12] ARM: dts: stm32: Use exti interrupt-map on stm32mp151

[Antonio Borneo]

Stop using the internal table of the exti driver and use the more
flexible interrupt-map feature in DT.

Convert the driver's table for stm32mp151 to the interrupt-map
property in DT.

Signed-off-by: Antonio Borneo <antonio.borneo at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp151.dtsi | 51 ++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index fa4cbd312e5a..33c460cacb04 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -1223,7 +1223,58 @@ exti: interrupt-controller at 5000d000 {
 			compatible = "st,stm32mp1-exti", "syscon";
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			#address-cells = <0>;
 			reg = <0x5000d000 0x400>;
+
+			exti-interrupt-map {
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupt-map-mask = <0xffffffff 0>;
+				interrupt-map =
+					<0  0 &intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,
+					<1  0 &intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+					<2  0 &intc GIC_SPI 8   IRQ_TYPE_LEVEL_HIGH>,
+					<3  0 &intc GIC_SPI 9   IRQ_TYPE_LEVEL_HIGH>,
+					<4  0 &intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+					<5  0 &intc GIC_SPI 23  IRQ_TYPE_LEVEL_HIGH>,
+					<6  0 &intc GIC_SPI 64  IRQ_TYPE_LEVEL_HIGH>,
+					<7  0 &intc GIC_SPI 65  IRQ_TYPE_LEVEL_HIGH>,
+					<8  0 &intc GIC_SPI 66  IRQ_TYPE_LEVEL_HIGH>,
+					<9  0 &intc GIC_SPI 67  IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &intc GIC_SPI 40  IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &intc GIC_SPI 42  IRQ_TYPE_LEVEL_HIGH>,
+					<12 0 &intc GIC_SPI 76  IRQ_TYPE_LEVEL_HIGH>,
+					<13 0 &intc GIC_SPI 77  IRQ_TYPE_LEVEL_HIGH>,
+					<14 0 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<15 0 &intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+					<16 0 &intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+					<19 0 &intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+					<21 0 &intc GIC_SPI 31  IRQ_TYPE_LEVEL_HIGH>,
+					<22 0 &intc GIC_SPI 33  IRQ_TYPE_LEVEL_HIGH>,
+					<23 0 &intc GIC_SPI 72  IRQ_TYPE_LEVEL_HIGH>,
+					<24 0 &intc GIC_SPI 95  IRQ_TYPE_LEVEL_HIGH>,
+					<25 0 &intc GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<26 0 &intc GIC_SPI 37  IRQ_TYPE_LEVEL_HIGH>,
+					<27 0 &intc GIC_SPI 38  IRQ_TYPE_LEVEL_HIGH>,
+					<28 0 &intc GIC_SPI 39  IRQ_TYPE_LEVEL_HIGH>,
+					<29 0 &intc GIC_SPI 71  IRQ_TYPE_LEVEL_HIGH>,
+					<30 0 &intc GIC_SPI 52  IRQ_TYPE_LEVEL_HIGH>,
+					<31 0 &intc GIC_SPI 53  IRQ_TYPE_LEVEL_HIGH>,
+					<32 0 &intc GIC_SPI 82  IRQ_TYPE_LEVEL_HIGH>,
+					<33 0 &intc GIC_SPI 83  IRQ_TYPE_LEVEL_HIGH>,
+					<46 0 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<47 0 &intc GIC_SPI 93  IRQ_TYPE_LEVEL_HIGH>,
+					<48 0 &intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					<50 0 &intc GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					<52 0 &intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					<53 0 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					<54 0 &intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					<61 0 &intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<65 0 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<68 0 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					<70 0 &intc GIC_SPI 62  IRQ_TYPE_LEVEL_HIGH>,
+					<73 0 &intc GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		syscfg: syscon at 50020000 {
-- 
2.34.1