[PATCH 09/12] ARM: dts: stm32: Use exti interrupt-map on stm32mp131

[Antonio Borneo]

Stop using the internal table of the exti driver and use the more
flexible interrupt-map feature in DT.
By switching away from using the internal table, there is no need
anymore to use the specific compatible "st,stm32mp13-exti", which
was introduced to select the proper internal table.

Convert the driver table to interrupt-map property.
Switch the compatible string to the generic "st,stm32mp1-exti", in
place of the specific "st,stm32mp13-exti".

Older DT using compatible "st,stm32mp13-exti" will still work as
the driver remains backward compatible.

Signed-off-by: Antonio Borneo <antonio.borneo at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp131.dtsi | 49 +++++++++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b04d24c939c3..14bd1c9bedd9 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1093,10 +1093,57 @@ rcc: rcc at 50000000 {
 		};
 
 		exti: interrupt-controller at 5000d000 {
-			compatible = "st,stm32mp13-exti", "syscon";
+			compatible = "st,stm32mp1-exti", "syscon";
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			#address-cells = <0>;
 			reg = <0x5000d000 0x400>;
+
+			exti-interrupt-map {
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupt-map-mask = <0xffffffff 0>;
+				interrupt-map =
+					<0  0 &intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,
+					<1  0 &intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+					<2  0 &intc GIC_SPI 8   IRQ_TYPE_LEVEL_HIGH>,
+					<3  0 &intc GIC_SPI 9   IRQ_TYPE_LEVEL_HIGH>,
+					<4  0 &intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+					<5  0 &intc GIC_SPI 24  IRQ_TYPE_LEVEL_HIGH>,
+					<6  0 &intc GIC_SPI 65  IRQ_TYPE_LEVEL_HIGH>,
+					<7  0 &intc GIC_SPI 66  IRQ_TYPE_LEVEL_HIGH>,
+					<8  0 &intc GIC_SPI 67  IRQ_TYPE_LEVEL_HIGH>,
+					<9  0 &intc GIC_SPI 68  IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &intc GIC_SPI 41  IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &intc GIC_SPI 43  IRQ_TYPE_LEVEL_HIGH>,
+					<12 0 &intc GIC_SPI 77  IRQ_TYPE_LEVEL_HIGH>,
+					<13 0 &intc GIC_SPI 78  IRQ_TYPE_LEVEL_HIGH>,
+					<14 0 &intc GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<15 0 &intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<16 0 &intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+					<19 0 &intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+					<21 0 &intc GIC_SPI 32  IRQ_TYPE_LEVEL_HIGH>,
+					<22 0 &intc GIC_SPI 34  IRQ_TYPE_LEVEL_HIGH>,
+					<23 0 &intc GIC_SPI 73  IRQ_TYPE_LEVEL_HIGH>,
+					<24 0 &intc GIC_SPI 93  IRQ_TYPE_LEVEL_HIGH>,
+					<25 0 &intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<26 0 &intc GIC_SPI 38  IRQ_TYPE_LEVEL_HIGH>,
+					<27 0 &intc GIC_SPI 39  IRQ_TYPE_LEVEL_HIGH>,
+					<28 0 &intc GIC_SPI 40  IRQ_TYPE_LEVEL_HIGH>,
+					<29 0 &intc GIC_SPI 72  IRQ_TYPE_LEVEL_HIGH>,
+					<30 0 &intc GIC_SPI 53  IRQ_TYPE_LEVEL_HIGH>,
+					<31 0 &intc GIC_SPI 54  IRQ_TYPE_LEVEL_HIGH>,
+					<32 0 &intc GIC_SPI 83  IRQ_TYPE_LEVEL_HIGH>,
+					<33 0 &intc GIC_SPI 84  IRQ_TYPE_LEVEL_HIGH>,
+					<44 0 &intc GIC_SPI 96  IRQ_TYPE_LEVEL_HIGH>,
+					<47 0 &intc GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
+					<48 0 &intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<50 0 &intc GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<52 0 &intc GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<53 0 &intc GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<68 0 &intc GIC_SPI 63  IRQ_TYPE_LEVEL_HIGH>,
+					<70 0 &intc GIC_SPI 98  IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		syscfg: syscon at 50020000 {
-- 
2.34.1