[PATCH v2 1/3] pmdomain: imx93-pd: replace dev_err() with dev_err_probe()

[Dario Binacchi]

This way, the code becomes more compact, and dev_err_probe() is used in
every error path of the probe() function.

Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>

---

Changes in v2:
- Drop the extra { } to be even more compact.

 drivers/pmdomain/imx/imx93-pd.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/pmdomain/imx/imx93-pd.c b/drivers/pmdomain/imx/imx93-pd.c
index d750a7dc58d2..44daecbe5cc3 100644
--- a/drivers/pmdomain/imx/imx93-pd.c
+++ b/drivers/pmdomain/imx/imx93-pd.c
@@ -125,11 +125,10 @@ static int imx93_pd_probe(struct platform_device *pdev)
 	/* Just to sync the status of hardware */
 	if (!domain->init_off) {
 		ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
-		if (ret) {
-			dev_err(domain->dev, "failed to enable clocks for domain: %s\n",
-				domain->genpd.name);
-			return ret;
-		}
+		if (ret)
+			return dev_err_probe(domain->dev, ret,
+					     "failed to enable clocks for domain: %s\n",
+					     domain->genpd.name);
 	}
 
 	ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
-- 
2.43.0