[PATCH v2] arm: dts: bcm2711: Describe Ethernet LEDs

[Florian Fainelli]

On 4/22/24 22:44, Stefan Wahren wrote:
> Hi Florian,
> 
> Am 23.04.24 um 01:08 schrieb Florian Fainelli:
>> Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well
>> as the Raspberry Pi 4 CM board. The Raspberry Pi 400 board does not
>> include RJ45 connector LEDs so the 'leds' node is deleted accordingly.
>>
>> Signed-off-by: Florian Fainelli <florian.fainelli at broadcom.com>
>> ---
>> Changes in v2:
>>
>> - added "function = LED_FUNCTION_LAN"
>>
>>   .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 20 +++++++++++++++++
>>   .../arm/boot/dts/broadcom/bcm2711-rpi-400.dts |  1 +
>>   .../boot/dts/broadcom/bcm2711-rpi-cm4-io.dts  | 22 +++++++++++++++++++
>>   3 files changed, 43 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts 
>> b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
>> index cfc8cb5e10ba..7a0f495ff726 100644
>> --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
>> +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
>> @@ -5,6 +5,7 @@
>>   #include "bcm283x-rpi-led-deprecated.dtsi"
>>   #include "bcm283x-rpi-usb-peripheral.dtsi"
>>   #include "bcm283x-rpi-wifi-bt.dtsi"
>> +#include <dt-bindings/leds/common.h>
>>
>>   / {
>>       compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
>> @@ -204,6 +205,25 @@ &genet_mdio {
>>       phy1: ethernet-phy at 1 {
>>           /* No PHY interrupt */
>>           reg = <0x1>;
>> +
>> +        leds {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +
>> +            leds at 0 {
>> +                reg = <0>;
>> +                color = <LED_COLOR_ID_GREEN>;
>> +                function = LED_FUNCTION_LAN;
>> +                default-state = "keep";
>> +            };
>> +
>> +            leds at 1 {
>> +                reg = <1>;
>> +                color = <LED_COLOR_ID_AMBER>;
>> +                function = LED_FUNCTION_LAN;
>> +                default-state = "keep";
>> +            };
>> +        };
> this looks good to me, but i'm wondering about the address numbering.
> This ones starts with 0 and the CM4 starts with 1. Does this come from
> the PHY?

Yes the PHY numbering is local to the PHY, reg = 0 maps to LED1, reg = 1 
maps to LED2 and so on and so forth. There is no LED0 in the PHY 
datasheet, so I expect people writing DTSs to subtract by 1 when 
defining their "reg" property.

Will re-submit with the DT issues spotted by Rob's bot fixed.
-- 
Florian

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4221 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240423/5cb60a2b/attachment.p7s>