[EXT] Re: [PATCH v10 09/11] arm64: dts: imx93-11x11-evk: enable usb and typec nodes

[Xu Yang]

> 
> On Thu, Mar 21, 2024 at 04:14:37PM +0800, Xu Yang wrote:
> > There are 2 Type-C ports and 2 USB controllers on i.MX93. Enable them.
> >
> > Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> >
> > ---
> > Changes in v2:
> >  - remove status property in ptn5110 nodes
> >  - fix dt-schema warnings
> > Changes in v3:
> >  - no changes
> > Changes in v4:
> >  - no changes
> > Changes in v5:
> >  - no changes
> > Changes in v6:
> >  - no changes
> > Changes in v7:
> >  - no changes
> > Changes in v8:
> >  - no changes
> > Changes in v9:
> >  - use compatible "nxp,ptn5110", "tcpci"
> > Changes in v10:
> >  - no changes
> > ---
> >  .../boot/dts/freescale/imx93-11x11-evk.dts    | 118 ++++++++++++++++++
> >  1 file changed, 118 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > index 9921ea13ab48..ecc01d872e95 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > @@ -5,6 +5,7 @@
> >
> >  /dts-v1/;
> >
> > +#include <dt-bindings/usb/pd.h>
> >  #include "imx93.dtsi"
> >
> >  / {
> > @@ -104,6 +105,80 @@ &mu2 {
> >       status = "okay";
> >  };
> >
> > +&lpi2c3 {
> > +     #address-cells = <1>;
> > +     #size-cells = <0>;
> > +     clock-frequency = <400000>;
> > +     pinctrl-names = "default", "sleep";
> > +     pinctrl-0 = <&pinctrl_lpi2c3>;
> > +     pinctrl-1 = <&pinctrl_lpi2c3>;
> 
> Do you really need "sleep" pinctrl state?

"sleep" pinctrl state can be removed.

> 
> > +     status = "okay";
> > +
> > +     ptn5110: tcpc at 50 {
> > +             compatible = "nxp,ptn5110", "tcpci";
> > +             reg = <0x50>;
> > +             interrupt-parent = <&gpio3>;
> > +             interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> > +
> > +             typec1_con: connector {
> > +                     compatible = "usb-c-connector";
> > +                     label = "USB-C";
> > +                     power-role = "dual";
> > +                     data-role = "dual";
> > +                     try-power-role = "sink";
> > +                     source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> > +                     sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
> > +                                  PDO_VAR(5000, 20000, 3000)>;
> > +                     op-sink-microwatt = <15000000>;
> > +                     self-powered;
> > +
> > +                     ports {
> > +                             #address-cells = <1>;
> > +                             #size-cells = <0>;
> > +
> > +                             port at 0 {
> > +                                     reg = <0>;
> 
> Have a newline between properties and child node.

Okay.

Thanks,
Xu Yang

> 
> Shawn
> 
> > +                                     typec1_dr_sw: endpoint {
> > +                                             remote-endpoint = <&usb1_drd_sw>;
> > +                                     };
> > +                             };
> > +                     };
> > +             };
> > +     };
> > +
> > +     ptn5110_2: tcpc at 51 {
> > +             compatible = "nxp,ptn5110", "tcpci";
> > +             reg = <0x51>;
> > +             interrupt-parent = <&gpio3>;
> > +             interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> > +
> > +             typec2_con: connector {
> > +                     compatible = "usb-c-connector";
> > +                     label = "USB-C";
> > +                     power-role = "dual";
> > +                     data-role = "dual";
> > +                     try-power-role = "sink";
> > +                     source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> > +                     sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
> > +                                  PDO_VAR(5000, 20000, 3000)>;
> > +                     op-sink-microwatt = <15000000>;
> > +                     self-powered;
> > +
> > +                     ports {
> > +                             #address-cells = <1>;
> > +                             #size-cells = <0>;
> > +
> > +                             port at 0 {
> > +                                     reg = <0>;
> > +                                     typec2_dr_sw: endpoint {
> > +                                             remote-endpoint = <&usb2_drd_sw>;
> > +                                     };
> > +                             };
> > +                     };
> > +             };
> > +     };
> > +};
> > +
> >  &eqos {
> >       pinctrl-names = "default";
> >       pinctrl-0 = <&pinctrl_eqos>;
> > @@ -156,6 +231,42 @@ &lpuart5 {
> >       status = "okay";
> >  };
> >
> > +&usbotg1 {
> > +     dr_mode = "otg";
> > +     hnp-disable;
> > +     srp-disable;
> > +     adp-disable;
> > +     usb-role-switch;
> > +     disable-over-current;
> > +     samsung,picophy-pre-emp-curr-control = <3>;
> > +     samsung,picophy-dc-vol-level-adjust = <7>;
> > +     status = "okay";
> > +
> > +     port {
> > +             usb1_drd_sw: endpoint {
> > +                     remote-endpoint = <&typec1_dr_sw>;
> > +             };
> > +     };
> > +};
> > +
> > +&usbotg2 {
> > +     dr_mode = "otg";
> > +     hnp-disable;
> > +     srp-disable;
> > +     adp-disable;
> > +     usb-role-switch;
> > +     disable-over-current;
> > +     samsung,picophy-pre-emp-curr-control = <3>;
> > +     samsung,picophy-dc-vol-level-adjust = <7>;
> > +     status = "okay";
> > +
> > +     port {
> > +             usb2_drd_sw: endpoint {
> > +                     remote-endpoint = <&typec2_dr_sw>;
> > +             };
> > +     };
> > +};
> > +
> >  &usdhc1 {
> >       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> >       pinctrl-0 = <&pinctrl_usdhc1>;
> > @@ -222,6 +333,13 @@ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL        0x57e
> >               >;
> >       };
> >
> > +     pinctrl_lpi2c3: lpi2c3grp {
> > +             fsl,pins = <
> > +                     MX93_PAD_GPIO_IO28__LPI2C3_SDA                  0x40000b9e
> > +                     MX93_PAD_GPIO_IO29__LPI2C3_SCL                  0x40000b9e
> > +             >;
> > +     };
> > +
> >       pinctrl_uart1: uart1grp {
> >               fsl,pins = <
> >                       MX93_PAD_UART1_RXD__LPUART1_RX                  0x31e
> > --
> > 2.34.1
> >