[PATCH v2 09/14] arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM module

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

The level of the interrupt signal is active low instead. Fix this.

Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S")
Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
Changes for v2:
* none
---
 arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 3e7db968f7e64..60abcb636cedf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -210,7 +210,7 @@ rv3028: rtc at 52 {
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
 		trickle-diode-disable;
 	};
 };
-- 
2.43.0