[PATCH v2 08/14] arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL board

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

Some signals have external pullup resistors on the board and don't need
the internal ones to be enabled. Due to silicon errata ERR050080 let's
disable the internal pull resistors whererever possible and prevent
any unwanted behavior in case they wear out.

Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards")
Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
Changes for v2:
* none
---
 .../boot/dts/freescale/imx8mm-kontron-bl.dts   | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index 97562d6ed8012..e07497411caea 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -474,40 +474,40 @@ MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
-- 
2.43.0