[PATCH v2 1/3] ARM: shmobile: defconfig: Switch to DRM_SHMOBILE

[Geert Uytterhoeven]

Now the DRM driver for the SH-Mobile LCD Controller supports DT, replace
the legacy frame buffer device driver by the DRM driver.

Disable frame buffer device drivers, as this was the last frame buffer
device driver for Renesas ARM systems.
Enable CONFIG_DRM_FBDEV_EMULATION and CONFIG_FB_DEVICE, as these are no
longer auto-enabled since commit bb6c4507fe825f1b ("drm: fix up fbdev
Kconfig defaults").

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
v2:
  - New.
---
 arch/arm/configs/shmobile_defconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index e2ea369548eb0a8d..c47a638172a89bfd 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -135,8 +135,10 @@ CONFIG_VIDEO_ADV7604=y
 CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
+CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_RCAR_DU=y
 # CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
+CONFIG_DRM_SHMOBILE=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
@@ -145,8 +147,7 @@ CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
 CONFIG_SOUND=y
-- 
2.34.1