[PATCH] net: stmmac: fix FPE events losing

Jianheng Zhang Jianheng.Zhang at synopsys.com
Tue Nov 21 23:37:51 PST 2023


> From: Serge Semin <fancer.lancer at gmail.com>
> Sent: Tuesday, November 21, 2023 8:09 PM
> To: Jianheng Zhang <jianheng at synopsys.com>
> Cc: Russell King <linux at armlinux.org.uk>; Alexandre Torgue <alexandre.torgue at foss.st.com>; Jose
> Abreu <joabreu at synopsys.com>; David S. Miller <davem at davemloft.net>; Eric Dumazet
> <edumazet at google.com>; Jakub Kicinski <kuba at kernel.org>; Paolo Abeni <pabeni at redhat.com>;
> Maxime Coquelin <mcoquelin.stm32 at gmail.com>; Tan Tee Min <tee.min.tan at intel.com>; Ong Boon
> Leong <boon.leong.ong at intel.com>; Voon Weifeng <weifeng.voon at intel.com>; Mohammad Athari Bin
> Ismail <mohammad.athari.ismail at intel.com>; netdev at vger.kernel.org;
> linux-stm32 at st-md-mailman.stormreply.com; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; James Li <lijames at synopsys.com>
> Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> 
> On Tue, Nov 21, 2023 at 09:31:31AM +0000, Jianheng Zhang wrote:
> > > From: Jianheng Zhang
> > > Sent: Thursday, November 16, 2023 12:01 AM
> > > To: Russell King <linux at armlinux.org.uk>; Serge Semin <fancer.lancer at gmail.com>
> > > Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>; Jose Abreu <joabreu at synopsys.com>; David
> S.
> > > Miller <davem at davemloft.net>; Eric Dumazet <edumazet at google.com>; Jakub Kicinski
> > > <kuba at kernel.org>; Paolo Abeni <pabeni at redhat.com>; Maxime Coquelin
> > > <mcoquelin.stm32 at gmail.com>; Tan Tee Min <tee.min.tan at intel.com>; Ong Boon Leong
> > > <boon.leong.ong at intel.com>; Voon Weifeng <weifeng.voon at intel.com>; Mohammad Athari Bin
> Ismail
> > > <mohammad.athari.ismail at intel.com>; netdev at vger.kernel.org;
> > > linux-stm32 at st-md-mailman.stormreply.com; linux-arm-kernel at lists.infradead.org;
> > > linux-kernel at vger.kernel.org
> > > Subject: RE: [PATCH] net: stmmac: fix FPE events losing
> > >
> > >
> > > > -----Original Message-----
> > > > From: Russell King <linux at armlinux.org.uk>
> > > > Sent: Wednesday, November 15, 2023 10:26 PM
> > > > To: Serge Semin <fancer.lancer at gmail.com>
> > > > Cc: Jianheng Zhang <jianheng at synopsys.com>; Alexandre Torgue
> <alexandre.torgue at foss.st.com>;
> > > Jose
> > > > Abreu <joabreu at synopsys.com>; David S. Miller <davem at davemloft.net>; Eric Dumazet
> > > > <edumazet at google.com>; Jakub Kicinski <kuba at kernel.org>; Paolo Abeni <pabeni at redhat.com>;
> > > > Maxime Coquelin <mcoquelin.stm32 at gmail.com>; Tan Tee Min <tee.min.tan at intel.com>; Ong
> Boon
> > > > Leong <boon.leong.ong at intel.com>; Voon Weifeng <weifeng.voon at intel.com>; Mohammad
> Athari
> > > Bin
> > > > Ismail <mohammad.athari.ismail at intel.com>; netdev at vger.kernel.org;
> > > > linux-stm32 at st-md-mailman.stormreply.com; linux-arm-kernel at lists.infradead.org;
> > > > linux-kernel at vger.kernel.org
> > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> > > >
> > > > On Tue, Nov 14, 2023 at 02:59:57PM +0300, Serge Semin wrote:
> > > > > On Tue, Nov 14, 2023 at 11:07:34AM +0000, Jianheng Zhang wrote:
> > > > > > The 32-bit access of register MAC_FPE_CTRL_STS may clear the FPE status
> > > > > > bits unexpectedly. Use 8-bit access for MAC_FPE_CTRL_STS control bits to
> > > > > > avoid unexpected access of MAC_FPE_CTRL_STS status bits that can reduce
> > > > > > the FPE handshake retries.
> > > > > >
> > > > > > The bit[19:17] of register MAC_FPE_CTRL_STS are status register bits.
> > > > > > Those bits are clear on read (or write of 1 when RCWE bit in
> > > > > > MAC_CSR_SW_Ctrl register is set). Using 32-bit access for
> > > > > > MAC_FPE_CTRL_STS control bits makes side effects that clear the status
> > > > > > bits. Then the stmmac interrupt handler missing FPE event status and
> > > > > > leads to FPE handshake failure and retries.
> > > > > >
> > > > > > The bit[7:0] of register MAC_FPE_CTRL_STS are control bits or reserved
> > > > > > that have no access side effects, so can use 8-bit access for
> > > > > > MAC_FPE_CTRL_STS control bits.
> > > > > >
> > > > > > Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
> > > > > > Signed-off-by: jianheng <jianheng at synopsys.com>
> > > > > > ---
> > > > > >  drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 12 ++++++------
> > > > > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > index e95d35f..7333995 100644
> > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > @@ -716,11 +716,11 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq,
> u32
> > > > num_rxq,
> > > > > >  	u32 value;
> > > > > >
> > > > > >  	if (!enable) {
> > > > >
> > > > > > -		value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > > +		value = readb(ioaddr + MAC_FPE_CTRL_STS);
> > > > >
> > > > > Note this may break the platforms which don't support non-32 MMIOs for
> > > > > some devices. None of the currently supported glue-drivers explicitly
> > > > > state they have such peculiarity, but at the same time the STMMAC-core
> > > > > driver at the present state uses the dword IO ops only. For instance
> > > > > the PCIe subsystem has the special accessors for such cases:
> > > > > pci_generic_config_read32()
> > > > > pci_generic_config_write32()
> > > > > which at the very least are utilized on the Tegra and Loongson
> > > > > platforms to access the host CSR spaces. These platforms are also
> > > > > equipped with the DW MACs. The problem might be irrelevant for all the
> > > > > currently supported DW MAC controllers implementations though, but
> > > > > still it worth to draw an attention to the problem possibility and in
> > > > > order to prevent it before ahead it would be better to just avoid
> > > > > using the byte-/word- IOs if it's possible.
> > > >
> > > > Yes, this exists for configuration accesses, and is damn annoying
> > > > because the read-modify-write of these can end up clearing PCI
> > > > status register bits that are W1C.
> > > >
> > > > I've never heard of that problem with MMIO though.
> > > >
> > > > --
> > > > RMK's Patch system:
> > > >
> > >
> https://urldefense.com/v3/__https://www.armlinux.org.uk/developer/patches/__;!!A4F2R9G_pg!ZnsQc
> > > >
> > >
> 7LKbdCiIj_nLBkt44MRSL8W8YD4WvMmPNkHFlDMrjrVqEVOVA1-P-9BVE3Oa5bC1ymKXLNV5C9mJ_rfFtLW
> > > > Fg$
> > > > FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
> > > Thanks for all your mention about the potential risks of using readb and suggestions, I'll consider a
> new
> > > solution and update the patch.
> > >
> > > Best Regards,
> > > Jianheng
> >
> > Thanks for Andrew's suggestion. I consider the solution of set
> > MAC_CSR_SW_Ctrl.RCWE carefully and found that the MAC_CSR_SW_Ctrl.RCWE
> > is efficient for many other interrupt status registers, and some are used
> > in current stmmac driver (LPI PMT MMC etc). Those registers work fine in
> > clear on read mode with current code. So, I think there is no need to
> > set MAC_CSR_SW_Ctrl.RCWE that will make a large impact to current
> > interrupt handler.
> >
> > I try adding a new member variable(staged_fpe_state) to stmmac_fpe_cfg
> > that is used to stage the MAC_FPE_CTRL_STS value read in
> > dwmac5_fpe_send_mpacket(). And in dwmac5_fpe_irq_status(), use this staged
> > value and current value of MAC_FPE_CTRL_STS to check FPE status. The
> > draft patch is below.
> 
> Are the status flags in the MAC_FPE_CTRL_STS register cleared on
> _writes_? (I am asking because for some reason my DW QoS Eth v5.10a HW
> manual has the status MAC_FPE_CTRL_STS flags marked as R/W, which is
> weird access mode for the status flags.) If they turn to be _not_
> changeable on writes, then what about just converting the
> dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always
> writing to the MAC_FPE_CTRL_STS register, and if required preserve the
> shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure?
> AFAICS the only flag which needs to be preserved is EFPE - "enable
> FPE" flag.
> 
> Such implementation (if it's possible) shall be free from the _status_
> flags race condition and won't require additional serializations. On
> the contrary your suggestion AFAICS causes unresolved race condition
> in here
> 
> > +	value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> > +	fpe_cfg->staged_fpe_state = 0x0;
> 
> and here
> 
> >  	value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > +	cfg->staged_fpe_state = value;
> 
> Depending on the IRQ handling and the task scheduling timing you may
> end up with loosing the status flags anyway.
> 
> * Note I am not concerning here the MAC_FPE_CTRL_STS control flags
> * race condition which AFAICS already exist in the current frame
> * preemption code. See the configs performed in the open/close/suspend
> * methods, in the link state change callbacks, in the worker task and
> * in the FPE status IRQ handler. Control flag accesses don't look
> * coherent there.
> 
> -Serge(y)
> 
> >
> > Best Regards,
> > Jianheng
> >
> > [PATCH v2] net: stmmac: fix FPE events losing
> >
> > ---
> >  drivers/net/ethernet/stmicro/stmmac/dwmac5.c      | 9 +++++++--
> >  drivers/net/ethernet/stmicro/stmmac/dwmac5.h      | 1 +
> >  drivers/net/ethernet/stmicro/stmmac/hwif.h        | 1 +
> >  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++++-
> >  include/linux/stmmac.h                            | 1 +
> >  5 files changed, 15 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > index e95d35f..8917fd0 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > @@ -736,12 +736,15 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32
> num_rxq,
> >
> >  int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> >  {
> > +	struct stmmac_priv *priv = netdev_priv(dev);
> > +	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
> >  	u32 value;
> >  	int status;
> >
> >  	status = FPE_EVENT_UNKNOWN;
> >
> > -	value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > +	value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> > +	fpe_cfg->staged_fpe_state = 0x0;
> >
> >  	if (value & TRSP) {
> >  		status |= FPE_EVENT_TRSP;
> > @@ -766,11 +769,13 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> >  	return status;
> >  }
> >
> > -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
> > +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > +			     enum stmmac_mpacket_type type)
> >  {
> >  	u32 value;
> >
> >  	value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > +	cfg->staged_fpe_state = value;
> >
> >  	if (type == MPACKET_VERIFY) {
> >  		value &= ~SRSP;
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > index 53c138d..022c1a2 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > @@ -156,6 +156,7 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
> >  void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> >  			  bool enable);
> >  void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
> > +				 struct stmmac_fpe_cfg *cfg,
> >  			     enum stmmac_mpacket_type type);
> >  int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > index b95d3e1..5496781 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > @@ -415,6 +415,7 @@ struct stmmac_ops {
> >  	void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> >  			      bool enable);
> >  	void (*fpe_send_mpacket)(void __iomem *ioaddr,
> > +				 struct stmmac_fpe_cfg *cfg,
> >  				 enum stmmac_mpacket_type type);
> >  	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
> >  };
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index 3e50fd5..6a29f55 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool
> is_up)
> >  	bool *hs_enable = &fpe_cfg->hs_enable;
> >
> >  	if (is_up && *hs_enable) {
> > -		stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
> > +		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
> > +					MPACKET_VERIFY);
> >  	} else {
> >  		*lo_state = FPE_STATE_OFF;
> >  		*lp_state = FPE_STATE_OFF;
> > @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
> >  		/* If user has requested FPE enable, quickly response */
> >  		if (*hs_enable)
> >  			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > +						fpe_cfg,
> >  						MPACKET_RESPONSE);
> >  	}
> >
> > @@ -7280,6 +7282,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> >  			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
> >  				    *lo_state, *lp_state);
> >  			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > +						fpe_cfg,
> >  						MPACKET_VERIFY);
> >  		}
> >  		/* Sleep then retry */
> > @@ -7294,6 +7297,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
> >  	if (priv->plat->fpe_cfg->hs_enable != enable) {
> >  		if (enable) {
> >  			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > +						priv->plat->fpe_cfg,
> >  						MPACKET_VERIFY);
> >  		} else {
> >  			priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
> > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> > index 0b4658a..1322c78 100644
> > --- a/include/linux/stmmac.h
> > +++ b/include/linux/stmmac.h
> > @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
> >  	bool hs_enable;				/* FPE handshake enable */
> >  	enum stmmac_fpe_state lp_fpe_state;	/* Link Partner FPE state */
> >  	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
> > +	u32 staged_fpe_state; /* Staged FPE state when read MAC_FPE_CTRL_STS */
> >  };
> >
> >  struct stmmac_safety_feature_cfg {
> > --
> > 1.8.3.1
> >

Hi Serge,

Thanks for your suggestion.

> Are the status flags in the MAC_FPE_CTRL_STS register cleared on
> _writes_?
A write of 0 has no impact irrespective of the value programmed in RCWE bit. 
This is safe option when writing the MAC_FPE_CTRL_STS register, which will
ensure that bits[19:16] are not modified unintentionally. 
When RCWE bit is 0 and status bits[19:16] are read, those will be cleared, a write
of 0 or 1 do not have any impact in this mode. 

> then what about just converting the
> dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always
> writing to the MAC_FPE_CTRL_STS register, and if required preserve the
> shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure?
> AFAICS the only flag which needs to be preserved is EFPE - "enable
> FPE" flag.
I think this is a good solution, pls check my draft patch below.

-Jianheng

[PATCH v2] net: stmmac: fix FPE events losing

---
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c       | 26 +++++++++-------------
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h       |  4 +++-
 .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c    |  3 ++-
 drivers/net/ethernet/stmicro/stmmac/hwif.h         |  4 +++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  8 ++++++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c    |  1 +
 include/linux/stmmac.h                             |  1 +
 7 files changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index e95d35f..9575e84 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -710,17 +710,15 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
 	}
 }
 
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			  u32 num_txq, u32 num_rxq,
 			  bool enable)
 {
 	u32 value;
 
 	if (!enable) {
-		value = readl(ioaddr + MAC_FPE_CTRL_STS);
-
-		value &= ~EFPE;
-
-		writel(value, ioaddr + MAC_FPE_CTRL_STS);
+		writel(0x0, ioaddr + MAC_FPE_CTRL_STS);
+		cfg->fpe_ctrl_sts_shadow = 0x0;
 		return;
 	}
 
@@ -729,9 +727,9 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
 	value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
 	writel(value, ioaddr + GMAC_RXQ_CTRL1);
 
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
-	value |= EFPE;
+	value = EFPE;
 	writel(value, ioaddr + MAC_FPE_CTRL_STS);
+	cfg->fpe_ctrl_sts_shadow = EFPE;
 }
 
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
@@ -766,19 +764,17 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 	return status;
 }
 
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
+void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			     enum stmmac_mpacket_type type)
 {
 	u32 value;
 
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
+	value = cfg->fpe_ctrl_sts_shadow;
 
-	if (type == MPACKET_VERIFY) {
-		value &= ~SRSP;
+	if (type == MPACKET_VERIFY)
 		value |= SVER;
-	} else {
-		value &= ~SVER;
+	else
 		value |= SRSP;
-	}
 
 	writel(value, ioaddr + MAC_FPE_CTRL_STS);
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 53c138d..aca846d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 			 unsigned int ptp_rate);
 void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
 			   struct stmmac_extra_stats *x, u32 txqcnt);
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			  u32 num_txq, u32 num_rxq,
 			  bool enable);
 void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
+			     struct stmmac_fpe_cfg *cfg, 
 			     enum stmmac_mpacket_type type);
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 453e88b..a74e71d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 	return 0;
 }
 
-static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq,
+static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+				   u32 num_txq,
 				   u32 num_rxq, bool enable)
 {
 	u32 value;
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index b95d3e1..68aa2d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -412,9 +412,11 @@ struct stmmac_ops {
 			     unsigned int ptp_rate);
 	void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev,
 			       struct stmmac_extra_stats *x, u32 txqcnt);
-	void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+	void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			      u32 num_txq, u32 num_rxq,
 			      bool enable);
 	void (*fpe_send_mpacket)(void __iomem *ioaddr,
+				 struct stmmac_fpe_cfg *cfg,
 				 enum stmmac_mpacket_type type);
 	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
 };
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3e50fd5..7791e9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 	bool *hs_enable = &fpe_cfg->hs_enable;
 
 	if (is_up && *hs_enable) {
-		stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
+		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+					MPACKET_VERIFY);
 	} else {
 		*lo_state = FPE_STATE_OFF;
 		*lp_state = FPE_STATE_OFF;
@@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
 		/* If user has requested FPE enable, quickly response */
 		if (*hs_enable)
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						fpe_cfg,
 						MPACKET_RESPONSE);
 	}
 
@@ -7262,6 +7264,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 		if (*lo_state == FPE_STATE_ENTERING_ON &&
 		    *lp_state == FPE_STATE_ENTERING_ON) {
 			stmmac_fpe_configure(priv, priv->ioaddr,
+					     fpe_cfg,
 					     priv->plat->tx_queues_to_use,
 					     priv->plat->rx_queues_to_use,
 					     *enable);
@@ -7280,6 +7283,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
 				    *lo_state, *lp_state);
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						fpe_cfg,
 						MPACKET_VERIFY);
 		}
 		/* Sleep then retry */
@@ -7294,6 +7298,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
 	if (priv->plat->fpe_cfg->hs_enable != enable) {
 		if (enable) {
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						priv->plat->fpe_cfg,
 						MPACKET_VERIFY);
 		} else {
 			priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
@@ -7754,6 +7759,7 @@ int stmmac_suspend(struct device *dev)
 	if (priv->dma_cap.fpesel) {
 		/* Disable FPE */
 		stmmac_fpe_configure(priv, priv->ioaddr,
+				     priv->plat->fpe_cfg,
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use, false);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index ac41ef4..6ad3e0a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1079,6 +1079,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 
 	priv->plat->fpe_cfg->enable = false;
 	stmmac_fpe_configure(priv, priv->ioaddr,
+			     priv->plat->fpe_cfg,
 			     priv->plat->tx_queues_to_use,
 			     priv->plat->rx_queues_to_use,
 			     false);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 0b4658a..48385c7 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
 	bool hs_enable;				/* FPE handshake enable */
 	enum stmmac_fpe_state lp_fpe_state;	/* Link Partner FPE state */
 	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
+	u32 fpe_ctrl_sts_shadow;		/* shadow of MAC_FPE_CTRL_STS */
 };
 
 struct stmmac_safety_feature_cfg {
-- 
1.8.3.1




More information about the linux-arm-kernel mailing list