[PATCH] net: stmmac: fix FPE events losing
Serge Semin
fancer.lancer at gmail.com
Tue Nov 21 04:09:04 PST 2023
On Tue, Nov 21, 2023 at 09:31:31AM +0000, Jianheng Zhang wrote:
> > From: Jianheng Zhang
> > Sent: Thursday, November 16, 2023 12:01 AM
> > To: Russell King <linux at armlinux.org.uk>; Serge Semin <fancer.lancer at gmail.com>
> > Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>; Jose Abreu <joabreu at synopsys.com>; David S.
> > Miller <davem at davemloft.net>; Eric Dumazet <edumazet at google.com>; Jakub Kicinski
> > <kuba at kernel.org>; Paolo Abeni <pabeni at redhat.com>; Maxime Coquelin
> > <mcoquelin.stm32 at gmail.com>; Tan Tee Min <tee.min.tan at intel.com>; Ong Boon Leong
> > <boon.leong.ong at intel.com>; Voon Weifeng <weifeng.voon at intel.com>; Mohammad Athari Bin Ismail
> > <mohammad.athari.ismail at intel.com>; netdev at vger.kernel.org;
> > linux-stm32 at st-md-mailman.stormreply.com; linux-arm-kernel at lists.infradead.org;
> > linux-kernel at vger.kernel.org
> > Subject: RE: [PATCH] net: stmmac: fix FPE events losing
> >
> >
> > > -----Original Message-----
> > > From: Russell King <linux at armlinux.org.uk>
> > > Sent: Wednesday, November 15, 2023 10:26 PM
> > > To: Serge Semin <fancer.lancer at gmail.com>
> > > Cc: Jianheng Zhang <jianheng at synopsys.com>; Alexandre Torgue <alexandre.torgue at foss.st.com>;
> > Jose
> > > Abreu <joabreu at synopsys.com>; David S. Miller <davem at davemloft.net>; Eric Dumazet
> > > <edumazet at google.com>; Jakub Kicinski <kuba at kernel.org>; Paolo Abeni <pabeni at redhat.com>;
> > > Maxime Coquelin <mcoquelin.stm32 at gmail.com>; Tan Tee Min <tee.min.tan at intel.com>; Ong Boon
> > > Leong <boon.leong.ong at intel.com>; Voon Weifeng <weifeng.voon at intel.com>; Mohammad Athari
> > Bin
> > > Ismail <mohammad.athari.ismail at intel.com>; netdev at vger.kernel.org;
> > > linux-stm32 at st-md-mailman.stormreply.com; linux-arm-kernel at lists.infradead.org;
> > > linux-kernel at vger.kernel.org
> > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> > >
> > > On Tue, Nov 14, 2023 at 02:59:57PM +0300, Serge Semin wrote:
> > > > On Tue, Nov 14, 2023 at 11:07:34AM +0000, Jianheng Zhang wrote:
> > > > > The 32-bit access of register MAC_FPE_CTRL_STS may clear the FPE status
> > > > > bits unexpectedly. Use 8-bit access for MAC_FPE_CTRL_STS control bits to
> > > > > avoid unexpected access of MAC_FPE_CTRL_STS status bits that can reduce
> > > > > the FPE handshake retries.
> > > > >
> > > > > The bit[19:17] of register MAC_FPE_CTRL_STS are status register bits.
> > > > > Those bits are clear on read (or write of 1 when RCWE bit in
> > > > > MAC_CSR_SW_Ctrl register is set). Using 32-bit access for
> > > > > MAC_FPE_CTRL_STS control bits makes side effects that clear the status
> > > > > bits. Then the stmmac interrupt handler missing FPE event status and
> > > > > leads to FPE handshake failure and retries.
> > > > >
> > > > > The bit[7:0] of register MAC_FPE_CTRL_STS are control bits or reserved
> > > > > that have no access side effects, so can use 8-bit access for
> > > > > MAC_FPE_CTRL_STS control bits.
> > > > >
> > > > > Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
> > > > > Signed-off-by: jianheng <jianheng at synopsys.com>
> > > > > ---
> > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 12 ++++++------
> > > > > 1 file changed, 6 insertions(+), 6 deletions(-)
> > > > >
> > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > index e95d35f..7333995 100644
> > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > @@ -716,11 +716,11 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32
> > > num_rxq,
> > > > > u32 value;
> > > > >
> > > > > if (!enable) {
> > > >
> > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > + value = readb(ioaddr + MAC_FPE_CTRL_STS);
> > > >
> > > > Note this may break the platforms which don't support non-32 MMIOs for
> > > > some devices. None of the currently supported glue-drivers explicitly
> > > > state they have such peculiarity, but at the same time the STMMAC-core
> > > > driver at the present state uses the dword IO ops only. For instance
> > > > the PCIe subsystem has the special accessors for such cases:
> > > > pci_generic_config_read32()
> > > > pci_generic_config_write32()
> > > > which at the very least are utilized on the Tegra and Loongson
> > > > platforms to access the host CSR spaces. These platforms are also
> > > > equipped with the DW MACs. The problem might be irrelevant for all the
> > > > currently supported DW MAC controllers implementations though, but
> > > > still it worth to draw an attention to the problem possibility and in
> > > > order to prevent it before ahead it would be better to just avoid
> > > > using the byte-/word- IOs if it's possible.
> > >
> > > Yes, this exists for configuration accesses, and is damn annoying
> > > because the read-modify-write of these can end up clearing PCI
> > > status register bits that are W1C.
> > >
> > > I've never heard of that problem with MMIO though.
> > >
> > > --
> > > RMK's Patch system:
> > >
> > https://urldefense.com/v3/__https://www.armlinux.org.uk/developer/patches/__;!!A4F2R9G_pg!ZnsQc
> > >
> > 7LKbdCiIj_nLBkt44MRSL8W8YD4WvMmPNkHFlDMrjrVqEVOVA1-P-9BVE3Oa5bC1ymKXLNV5C9mJ_rfFtLW
> > > Fg$
> > > FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
> > Thanks for all your mention about the potential risks of using readb and suggestions, I'll consider a new
> > solution and update the patch.
> >
> > Best Regards,
> > Jianheng
>
> Thanks for Andrew's suggestion. I consider the solution of set
> MAC_CSR_SW_Ctrl.RCWE carefully and found that the MAC_CSR_SW_Ctrl.RCWE
> is efficient for many other interrupt status registers, and some are used
> in current stmmac driver (LPI PMT MMC etc). Those registers work fine in
> clear on read mode with current code. So, I think there is no need to
> set MAC_CSR_SW_Ctrl.RCWE that will make a large impact to current
> interrupt handler.
>
> I try adding a new member variable(staged_fpe_state) to stmmac_fpe_cfg
> that is used to stage the MAC_FPE_CTRL_STS value read in
> dwmac5_fpe_send_mpacket(). And in dwmac5_fpe_irq_status(), use this staged
> value and current value of MAC_FPE_CTRL_STS to check FPE status. The
> draft patch is below.
Are the status flags in the MAC_FPE_CTRL_STS register cleared on
_writes_? (I am asking because for some reason my DW QoS Eth v5.10a HW
manual has the status MAC_FPE_CTRL_STS flags marked as R/W, which is
weird access mode for the status flags.) If they turn to be _not_
changeable on writes, then what about just converting the
dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always
writing to the MAC_FPE_CTRL_STS register, and if required preserve the
shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure?
AFAICS the only flag which needs to be preserved is EFPE - "enable
FPE" flag.
Such implementation (if it's possible) shall be free from the _status_
flags race condition and won't require additional serializations. On
the contrary your suggestion AFAICS causes unresolved race condition
in here
> + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> + fpe_cfg->staged_fpe_state = 0x0;
and here
> value = readl(ioaddr + MAC_FPE_CTRL_STS);
> + cfg->staged_fpe_state = value;
Depending on the IRQ handling and the task scheduling timing you may
end up with loosing the status flags anyway.
* Note I am not concerning here the MAC_FPE_CTRL_STS control flags
* race condition which AFAICS already exist in the current frame
* preemption code. See the configs performed in the open/close/suspend
* methods, in the link state change callbacks, in the worker task and
* in the FPE status IRQ handler. Control flag accesses don't look
* coherent there.
-Serge(y)
>
> Best Regards,
> Jianheng
>
> [PATCH v2] net: stmmac: fix FPE events losing
>
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 9 +++++++--
> drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 1 +
> drivers/net/ethernet/stmicro/stmmac/hwif.h | 1 +
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++++-
> include/linux/stmmac.h | 1 +
> 5 files changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> index e95d35f..8917fd0 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> @@ -736,12 +736,15 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
>
> int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> {
> + struct stmmac_priv *priv = netdev_priv(dev);
> + struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
> u32 value;
> int status;
>
> status = FPE_EVENT_UNKNOWN;
>
> - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> + fpe_cfg->staged_fpe_state = 0x0;
>
> if (value & TRSP) {
> status |= FPE_EVENT_TRSP;
> @@ -766,11 +769,13 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> return status;
> }
>
> -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
> +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> + enum stmmac_mpacket_type type)
> {
> u32 value;
>
> value = readl(ioaddr + MAC_FPE_CTRL_STS);
> + cfg->staged_fpe_state = value;
>
> if (type == MPACKET_VERIFY) {
> value &= ~SRSP;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> index 53c138d..022c1a2 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> @@ -156,6 +156,7 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
> void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> bool enable);
> void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
> + struct stmmac_fpe_cfg *cfg,
> enum stmmac_mpacket_type type);
> int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> index b95d3e1..5496781 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> @@ -415,6 +415,7 @@ struct stmmac_ops {
> void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> bool enable);
> void (*fpe_send_mpacket)(void __iomem *ioaddr,
> + struct stmmac_fpe_cfg *cfg,
> enum stmmac_mpacket_type type);
> int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
> };
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 3e50fd5..6a29f55 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
> bool *hs_enable = &fpe_cfg->hs_enable;
>
> if (is_up && *hs_enable) {
> - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
> + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
> + MPACKET_VERIFY);
> } else {
> *lo_state = FPE_STATE_OFF;
> *lp_state = FPE_STATE_OFF;
> @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
> /* If user has requested FPE enable, quickly response */
> if (*hs_enable)
> stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> + fpe_cfg,
> MPACKET_RESPONSE);
> }
>
> @@ -7280,6 +7282,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
> *lo_state, *lp_state);
> stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> + fpe_cfg,
> MPACKET_VERIFY);
> }
> /* Sleep then retry */
> @@ -7294,6 +7297,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
> if (priv->plat->fpe_cfg->hs_enable != enable) {
> if (enable) {
> stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> + priv->plat->fpe_cfg,
> MPACKET_VERIFY);
> } else {
> priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index 0b4658a..1322c78 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
> bool hs_enable; /* FPE handshake enable */
> enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */
> enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */
> + u32 staged_fpe_state; /* Staged FPE state when read MAC_FPE_CTRL_STS */
> };
>
> struct stmmac_safety_feature_cfg {
> --
> 1.8.3.1
>
More information about the linux-arm-kernel
mailing list