[PATCH v1 1/2] coresight: Add remote etm support

[Jinlong Mao]

On 11/7/2023 11:26 PM, Krzysztof Kozlowski wrote:
> On 07/11/2023 07:09, Mao Jinlong wrote:
>> Add support for ETM trace collection on remote processor using
>> coreSight framework.
>>
>> Signed-off-by: Mao Jinlong <quic_jinlmao at quicinc.com>
>> ---
>>   drivers/hwtracing/coresight/Kconfig           |   9 +
>>   drivers/hwtracing/coresight/Makefile          |   1 +
>>   drivers/hwtracing/coresight/coresight-core.c  |   3 +
>>   drivers/hwtracing/coresight/coresight-qmi.h   | 109 ++++++
>>   .../coresight/coresight-remote-etm.c          | 325 ++++++++++++++++++
>>   include/linux/coresight.h                     |   1 +
>>   6 files changed, 448 insertions(+)
>>   create mode 100644 drivers/hwtracing/coresight/coresight-qmi.h
>>   create mode 100644 drivers/hwtracing/coresight/coresight-remote-etm.c
>>
>> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
>> index 06f0a7594169..425886ab7401 100644
>> --- a/drivers/hwtracing/coresight/Kconfig
>> +++ b/drivers/hwtracing/coresight/Kconfig
>> @@ -247,4 +247,13 @@ config CORESIGHT_DUMMY
>>   
>>   	  To compile this driver as a module, choose M here: the module will be
>>   	  called coresight-dummy.
>> +
>> +config CORESIGHT_REMOTE_ETM
>> +	tristate "Remote processor ETM trace support"
>> +	select QCOM_QMI_HELPERS
>> +	help
>> +	  Enables support for ETM trace collection on remote processor using
>> +	  CoreSight framework. Enabling this will allow turning on ETM
>> +	  tracing on remote processor via sysfs by configuring the required
>> +	  CoreSight components.
>>   endif
.....
>> +}
>> +
>> +static const struct of_device_id remote_etm_match[] = {
>> +	{.compatible = "qcom,coresight-remote-etm"},
> Please order your patches correctly, so binding is documented before the
> users.
>
>> +	{}
>> +};
>> +
>> +static struct platform_driver remote_etm_driver = {
>> +	.probe          = remote_etm_probe,
>> +	.remove         = remote_etm_remove,
>> +	.driver         = {
>> +		.name   = "coresight-remote-etm",
>> +		.of_match_table = remote_etm_match,
>> +	},
>> +};
>> +
>> +int __init remote_etm_init(void)
>> +{
>> +	return platform_driver_register(&remote_etm_driver);
>> +}
>> +module_init(remote_etm_init);
>> +
>> +void __exit remote_etm_exit(void)
>> +{
>> +	platform_driver_unregister(&remote_etm_driver);
>> +}
>> +module_exit(remote_etm_exit);
> Why aren't you using module platform driver?
>
> Best regards,
> Krzysztof

Thanks for the review. I will check and address your comments.

Thanks
Jinlong Mao

>