[PATCH v1 1/2] coresight: Add remote etm support
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Tue Nov 7 07:26:16 PST 2023
On 07/11/2023 07:09, Mao Jinlong wrote:
> Add support for ETM trace collection on remote processor using
> coreSight framework.
>
> Signed-off-by: Mao Jinlong <quic_jinlmao at quicinc.com>
> ---
> drivers/hwtracing/coresight/Kconfig | 9 +
> drivers/hwtracing/coresight/Makefile | 1 +
> drivers/hwtracing/coresight/coresight-core.c | 3 +
> drivers/hwtracing/coresight/coresight-qmi.h | 109 ++++++
> .../coresight/coresight-remote-etm.c | 325 ++++++++++++++++++
> include/linux/coresight.h | 1 +
> 6 files changed, 448 insertions(+)
> create mode 100644 drivers/hwtracing/coresight/coresight-qmi.h
> create mode 100644 drivers/hwtracing/coresight/coresight-remote-etm.c
>
> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> index 06f0a7594169..425886ab7401 100644
> --- a/drivers/hwtracing/coresight/Kconfig
> +++ b/drivers/hwtracing/coresight/Kconfig
> @@ -247,4 +247,13 @@ config CORESIGHT_DUMMY
>
> To compile this driver as a module, choose M here: the module will be
> called coresight-dummy.
> +
> +config CORESIGHT_REMOTE_ETM
> + tristate "Remote processor ETM trace support"
> + select QCOM_QMI_HELPERS
> + help
> + Enables support for ETM trace collection on remote processor using
> + CoreSight framework. Enabling this will allow turning on ETM
> + tracing on remote processor via sysfs by configuring the required
> + CoreSight components.
> endif
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index 995d3b2c76df..a5283cab0bc0 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -29,5 +29,6 @@ obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o
> obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o
> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
> coresight-cti-sysfs.o
> +obj-$(CONFIG_CORESIGHT_REMOTE_ETM) += coresight-remote-etm.o
> obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o
> obj-$(CONFIG_CORESIGHT_DUMMY) += coresight-dummy.o
> diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
> index d7f0e231feb9..f365a3899821 100644
> --- a/drivers/hwtracing/coresight/coresight-core.c
> +++ b/drivers/hwtracing/coresight/coresight-core.c
> @@ -1094,6 +1094,7 @@ static int coresight_validate_source(struct coresight_device *csdev,
> if (subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_PROC &&
> subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE &&
> subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM &&
> + subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_REMOTE_PROC &&
> subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS) {
> dev_err(&csdev->dev, "wrong device subtype in %s\n", function);
> return -EINVAL;
> @@ -1164,6 +1165,7 @@ int coresight_enable(struct coresight_device *csdev)
> break;
> case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE:
> case CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM:
> + case CORESIGHT_DEV_SUBTYPE_SOURCE_REMOTE_PROC:
> case CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS:
> /*
> * Use the hash of source's device name as ID
> @@ -1215,6 +1217,7 @@ void coresight_disable(struct coresight_device *csdev)
> break;
> case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE:
> case CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM:
> + case CORESIGHT_DEV_SUBTYPE_SOURCE_REMOTE_PROC:
> case CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS:
> hash = hashlen_hash(hashlen_string(NULL, dev_name(&csdev->dev)));
> /* Find the path by the hash. */
> diff --git a/drivers/hwtracing/coresight/coresight-qmi.h b/drivers/hwtracing/coresight/coresight-qmi.h
> new file mode 100644
> index 000000000000..4c35ba8c8a05
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/coresight-qmi.h
> @@ -0,0 +1,109 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef _CORESIGHT_QMI_H
> +#define _CORESIGHT_QMI_H
> +
> +#include <linux/soc/qcom/qmi.h>
> +
> +#define CORESIGHT_QMI_SVC_ID (0x33)
> +#define CORESIGHT_QMI_VERSION (1)
> +
> +#define CORESIGHT_QMI_GET_ETM_REQ_V01 (0x002B)
> +#define CORESIGHT_QMI_GET_ETM_RESP_V01 (0x002B)
> +#define CORESIGHT_QMI_SET_ETM_REQ_V01 (0x002C)
> +#define CORESIGHT_QMI_SET_ETM_RESP_V01 (0x002C)
> +
> +#define CORESIGHT_QMI_GET_ETM_REQ_MAX_LEN (0)
> +#define CORESIGHT_QMI_GET_ETM_RESP_MAX_LEN (14)
> +#define CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN (7)
> +#define CORESIGHT_QMI_SET_ETM_RESP_MAX_LEN (7)
> +
> +#define TIMEOUT_MS (10000)
> +
> +enum coresight_etm_state_enum_type_v01 {
> + /* To force a 32 bit signed enum. Do not change or use */
> + CORESIGHT_ETM_STATE_ENUM_TYPE_MIN_ENUM_VAL_V01 = INT_MIN,
> + CORESIGHT_ETM_STATE_DISABLED_V01 = 0,
> + CORESIGHT_ETM_STATE_ENABLED_V01 = 1,
> + CORESIGHT_ETM_STATE_ENUM_TYPE_MAX_ENUM_VAL_01 = INT_MAX,
> +};
> +
> +struct coresight_get_etm_req_msg_v01 {
> + /*
> + * This element is a placeholder to prevent declaration of
> + * empty struct. Do not change.
> + */
> + char __placeholder;
> +};
> +
> +struct coresight_get_etm_resp_msg_v01 {
> + /* Mandatory */
> + /* QMI result Code */
> + struct qmi_response_type_v01 resp;
> +
> + /* Optional */
> + /* ETM output state, must be set to true if state is being passed */
> + uint8_t state_valid;
> + /* Present when result code is QMI_RESULT_SUCCESS */
> + enum coresight_etm_state_enum_type_v01 state;
> +};
> +
> +struct coresight_set_etm_req_msg_v01 {
> + /* Mandatory */
> + /* ETM output state */
> + enum coresight_etm_state_enum_type_v01 state;
> +};
> +
> +struct coresight_set_etm_resp_msg_v01 {
> + /* Mandatory */
> + struct qmi_response_type_v01 resp;
> +};
> +
> +static struct qmi_elem_info coresight_set_etm_req_msg_v01_ei[] = {
> + {
> + .data_type = QMI_UNSIGNED_4_BYTE,
> + .elem_len = 1,
> + .elem_size = sizeof(enum coresight_etm_state_enum_type_v01),
> + .array_type = NO_ARRAY,
> + .tlv_type = 0x01,
> + .offset = offsetof(struct coresight_set_etm_req_msg_v01,
> + state),
> + .ei_array = NULL,
> + },
> + {
> + .data_type = QMI_EOTI,
> + .elem_len = 0,
> + .elem_size = 0,
> + .array_type = NO_ARRAY,
> + .tlv_type = 0,
> + .offset = 0,
> + .ei_array = NULL,
> + },
> +};
> +
> +static struct qmi_elem_info coresight_set_etm_resp_msg_v01_ei[] = {
> + {
> + .data_type = QMI_STRUCT,
> + .elem_len = 1,
> + .elem_size = sizeof(struct qmi_response_type_v01),
> + .array_type = NO_ARRAY,
> + .tlv_type = 0x02,
> + .offset = offsetof(struct coresight_set_etm_resp_msg_v01,
> + resp),
> + .ei_array = qmi_response_type_v01_ei,
> + },
> + {
> + .data_type = QMI_EOTI,
> + .elem_len = 0,
> + .elem_size = 0,
> + .array_type = NO_ARRAY,
> + .tlv_type = 0,
> + .offset = 0,
> + .ei_array = NULL,
> + },
> +};
> +
> +#endif
> diff --git a/drivers/hwtracing/coresight/coresight-remote-etm.c b/drivers/hwtracing/coresight/coresight-remote-etm.c
> new file mode 100644
> index 000000000000..d895dc5d14c2
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/coresight-remote-etm.c
> @@ -0,0 +1,325 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/types.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/sysfs.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/coresight.h>
> +#include "coresight-qmi.h"
> +#include "coresight-priv.h"
> +
> +#define REMOTE_ETM_TRACE_ID_START 192
> +
> +DEFINE_CORESIGHT_DEVLIST(remote_etm_devs, "remote-etm");
Why do you define file-scope variables?
> +
> +static DEFINE_MUTEX(remote_etm_lock);
Drop, not used.
> +static LIST_HEAD(remote_etm_list);
Drop, not used.
> +
> +struct remote_etm_drvdata {
> + struct device *dev;
> + struct coresight_device *csdev;
> + struct mutex mutex;
> + struct qmi_handle handle;
> + uint32_t inst_id;
> + bool enable;
> + bool service_connected;
Your indentation is a mess.
> + bool security;
> + struct sockaddr_qrtr s_addr;
> + struct list_head link;
> +};
> +
> +static int service_remote_etm_new_server(struct qmi_handle *qmi,
> + struct qmi_service *svc)
> +{
> + struct remote_etm_drvdata *drvdata = container_of(qmi,
> + struct remote_etm_drvdata, handle);
> +
> + drvdata->s_addr.sq_family = AF_QIPCRTR;
> + drvdata->s_addr.sq_node = svc->node;
> + drvdata->s_addr.sq_port = svc->port;
> + drvdata->service_connected = true;
> + dev_info(drvdata->dev,
> + "Connection established between QMI handle and %d service\n",
> + drvdata->inst_id);
> +
> + return 0;
> +}
> +
> +static void service_remote_etm_del_server(struct qmi_handle *qmi,
> + struct qmi_service *svc)
> +{
> + struct remote_etm_drvdata *drvdata = container_of(qmi,
> + struct remote_etm_drvdata, handle);
> + drvdata->service_connected = false;
> + dev_info(drvdata->dev,
> + "Connection disconnected between QMI handle and %d service\n",
> + drvdata->inst_id);
> +}
> +
> +static struct qmi_ops server_ops = {
> + .new_server = service_remote_etm_new_server,
> + .del_server = service_remote_etm_del_server,
> +};
> +
> +static int remote_etm_enable(struct coresight_device *csdev,
> + struct perf_event *event, u32 mode)
> +{
> + struct remote_etm_drvdata *drvdata =
> + dev_get_drvdata(csdev->dev.parent);
> + struct coresight_set_etm_req_msg_v01 req;
> + struct coresight_set_etm_resp_msg_v01 resp = { { 0, 0 } };
> + struct qmi_txn txn;
> + int ret;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + if (!drvdata->service_connected) {
> + dev_err(drvdata->dev, "QMI service not connected!\n");
> + ret = EINVAL;
> + goto err;
> + }
> + /*
> + * The QMI handle may be NULL in the following scenarios:
> + * 1. QMI service is not present
> + * 2. QMI service is present but attempt to enable remote ETM is earlier
> + * than service is ready to handle request
> + * 3. Connection between QMI client and QMI service failed
> + *
> + * Enable CoreSight without processing further QMI commands which
> + * provides the option to enable remote ETM by other means.
> + */
> + req.state = CORESIGHT_ETM_STATE_ENABLED_V01;
> +
> + ret = qmi_txn_init(&drvdata->handle, &txn,
> + coresight_set_etm_resp_msg_v01_ei,
> + &resp);
> +
> + if (ret < 0) {
> + dev_err(drvdata->dev, "QMI tx init failed , ret:%d\n",
> + ret);
> + goto err;
> + }
> +
> + ret = qmi_send_request(&drvdata->handle, &drvdata->s_addr,
> + &txn, CORESIGHT_QMI_SET_ETM_REQ_V01,
> + CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN,
> + coresight_set_etm_req_msg_v01_ei,
> + &req);
> + if (ret < 0) {
> + dev_err(drvdata->dev, "QMI send ACK failed, ret:%d\n",
> + ret);
> + qmi_txn_cancel(&txn);
> + goto err;
> + }
> +
> + ret = qmi_txn_wait(&txn, msecs_to_jiffies(TIMEOUT_MS));
> + if (ret < 0) {
> + dev_err(drvdata->dev, "QMI qmi txn wait failed, ret:%d\n",
> + ret);
> + goto err;
> + }
> +
> + /* Check the response */
> + if (resp.resp.result != QMI_RESULT_SUCCESS_V01)
> + dev_err(drvdata->dev, "QMI request failed 0x%x\n",
> + resp.resp.error);
> +
> + drvdata->enable = true;
> + mutex_unlock(&drvdata->mutex);
> +
> + dev_info(drvdata->dev, "Remote ETM tracing enabled for instance %d\n",
> + drvdata->inst_id);
Why do you print so many info messages?
> + return 0;
> +err:
> + mutex_unlock(&drvdata->mutex);
> + return ret;
> +}
> +
> +static void remote_etm_disable(struct coresight_device *csdev,
> + struct perf_event *event)
> +{
> + struct remote_etm_drvdata *drvdata =
> + dev_get_drvdata(csdev->dev.parent);
> + struct coresight_set_etm_req_msg_v01 req;
> + struct coresight_set_etm_resp_msg_v01 resp = { { 0, 0 } };
> + struct qmi_txn txn;
> + int ret;
> +
> + mutex_lock(&drvdata->mutex);
> + if (!drvdata->service_connected) {
> + dev_err(drvdata->dev, "QMI service not connected!\n");
> + goto err;
> + }
> +
> + req.state = CORESIGHT_ETM_STATE_DISABLED_V01;
> +
> + ret = qmi_txn_init(&drvdata->handle, &txn,
> + coresight_set_etm_resp_msg_v01_ei,
> + &resp);
> +
> + if (ret < 0) {
> + dev_err(drvdata->dev, "QMI tx init failed , ret:%d\n",
> + ret);
> + goto err;
> + }
> +
> + ret = qmi_send_request(&drvdata->handle, &drvdata->s_addr,
> + &txn, CORESIGHT_QMI_SET_ETM_REQ_V01,
> + CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN,
> + coresight_set_etm_req_msg_v01_ei,
> + &req);
> + if (ret < 0) {
> + dev_err(drvdata->dev, "QMI send req failed, ret:%d\n",
> + ret);
> + qmi_txn_cancel(&txn);
> + goto err;
> + }
> +
> + ret = qmi_txn_wait(&txn, msecs_to_jiffies(TIMEOUT_MS));
> + if (ret < 0) {
> + dev_err(drvdata->dev, "QMI qmi txn wait failed, ret:%d\n",
> + ret);
> + goto err;
> + }
> +
> + /* Check the response */
> + if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
> + dev_err(drvdata->dev, "QMI request failed 0x%x\n",
> + resp.resp.error);
> + goto err;
> + }
> +
> + drvdata->enable = false;
> + dev_info(drvdata->dev, "Remote ETM tracing disabled for instance %d\n",
> + drvdata->inst_id);
> +err:
> + mutex_unlock(&drvdata->mutex);
> +}
> +
> +static const struct coresight_ops_source remote_etm_source_ops = {
> + .enable = remote_etm_enable,
> + .disable = remote_etm_disable,
> +};
> +
> +static const struct coresight_ops remote_cs_ops = {
> + .source_ops = &remote_etm_source_ops,
> +};
> +
> +static int remote_etm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct coresight_platform_data *pdata;
> + struct remote_etm_drvdata *drvdata;
> + struct coresight_desc desc = {0 };
> + int ret;
> +
> + desc.name = coresight_alloc_device_name(&remote_etm_devs, dev);
> + if (!desc.name)
> + return -ENOMEM;
> + pdata = coresight_get_platform_data(dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> + pdev->dev.platform_data = pdata;
> +
> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + drvdata->dev = &pdev->dev;
> + platform_set_drvdata(pdev, drvdata);
> +
> + ret = of_property_read_u32(pdev->dev.of_node, "qcom,inst-id",
> + &drvdata->inst_id);
> + if (ret)
> + return ret;
> +
> + mutex_init(&drvdata->mutex);
> +
> + ret = qmi_handle_init(&drvdata->handle,
> + CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN,
> + &server_ops, NULL);
> + if (ret < 0) {
> + dev_err(dev, "Remote ETM client init failed ret:%d\n", ret);
> + return ret;
Use return dev_err_probe()
> + }
> +
> + qmi_add_lookup(&drvdata->handle,
> + CORESIGHT_QMI_SVC_ID,
> + CORESIGHT_QMI_VERSION,
> + drvdata->inst_id);
> +
> + desc.type = CORESIGHT_DEV_TYPE_SOURCE;
> + desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_REMOTE_PROC;
> + desc.ops = &remote_cs_ops;
> + desc.pdata = pdev->dev.platform_data;
> + desc.dev = &pdev->dev;
> + drvdata->csdev = coresight_register(&desc);
> + if (IS_ERR(drvdata->csdev)) {
> + ret = PTR_ERR(drvdata->csdev);
> + goto err;
> + }
> + dev_info(dev, "Remote ETM initialized\n");
Drop, quite useless.
> +
> + pm_runtime_enable(dev);
> + if (drvdata->inst_id >= sizeof(int)*BITS_PER_BYTE)
> + dev_err(dev, "inst_id greater than boot_enable bit mask\n");
> +
> + list_add_tail(&drvdata->link, &remote_etm_list);
> +
> + return 0;
> +err:
> + qmi_handle_release(&drvdata->handle);
> + return ret;
> +}
> +
> +static int remote_etm_remove(struct platform_device *pdev)
> +{
> + struct remote_etm_drvdata *drvdata = platform_get_drvdata(pdev);
> + struct device *dev = &pdev->dev;
> +
> + list_del(&drvdata->link);
> + pm_runtime_disable(dev);
> + qmi_handle_release(&drvdata->handle);
> + coresight_unregister(drvdata->csdev);
> + return 0;
> +}
> +
> +static const struct of_device_id remote_etm_match[] = {
> + {.compatible = "qcom,coresight-remote-etm"},
Please order your patches correctly, so binding is documented before the
users.
> + {}
> +};
> +
> +static struct platform_driver remote_etm_driver = {
> + .probe = remote_etm_probe,
> + .remove = remote_etm_remove,
> + .driver = {
> + .name = "coresight-remote-etm",
> + .of_match_table = remote_etm_match,
> + },
> +};
> +
> +int __init remote_etm_init(void)
> +{
> + return platform_driver_register(&remote_etm_driver);
> +}
> +module_init(remote_etm_init);
> +
> +void __exit remote_etm_exit(void)
> +{
> + platform_driver_unregister(&remote_etm_driver);
> +}
> +module_exit(remote_etm_exit);
Why aren't you using module platform driver?
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list