[PATCH 23/23] arm64: zynqmp: Add phase tags marking

[Michal Simek]

On 5/2/23 15:35, Michal Simek wrote:
> bootph-all as phase tag was added to dt-schema
> (dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
> That's why add it also to Linux to be aligned with bootloader requirement.
> 
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
> 
> ---
>   arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi    |  6 ++++++
>   arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts |  3 +++
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi            | 12 ++++++++++++
>   3 files changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> index 581221fdadf1..719ea5d5ae88 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> @@ -11,30 +11,35 @@
>   #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
>   / {
>   	pss_ref_clk: pss_ref_clk {
> +		bootph-all;
>   		compatible = "fixed-clock";
>   		#clock-cells = <0>;
>   		clock-frequency = <33333333>;
>   	};
>   
>   	video_clk: video_clk {
> +		bootph-all;
>   		compatible = "fixed-clock";
>   		#clock-cells = <0>;
>   		clock-frequency = <27000000>;
>   	};
>   
>   	pss_alt_ref_clk: pss_alt_ref_clk {
> +		bootph-all;
>   		compatible = "fixed-clock";
>   		#clock-cells = <0>;
>   		clock-frequency = <0>;
>   	};
>   
>   	gt_crx_ref_clk: gt_crx_ref_clk {
> +		bootph-all;
>   		compatible = "fixed-clock";
>   		#clock-cells = <0>;
>   		clock-frequency = <108000000>;
>   	};
>   
>   	aux_ref_clk: aux_ref_clk {
> +		bootph-all;
>   		compatible = "fixed-clock";
>   		#clock-cells = <0>;
>   		clock-frequency = <27000000>;
> @@ -43,6 +48,7 @@ aux_ref_clk: aux_ref_clk {
>   
>   &zynqmp_firmware {
>   	zynqmp_clk: clock-controller {
> +		bootph-all;
>   		#clock-cells = <1>;
>   		compatible = "xlnx,zynqmp-clk";
>   		clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> index 78ff6a9b3144..8afdf4408a78 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> @@ -243,17 +243,20 @@ tpm at 0 { /* slm9670 - U144 */
>   
>   &i2c1 {
>   	status = "okay";
> +	bootph-all;
>   	clock-frequency = <400000>;
>   	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
>   	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
>   
>   	eeprom: eeprom at 50 { /* u46 - also at address 0x58 */
> +		bootph-all;
>   		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
>   		reg = <0x50>;
>   		/* WP pin EE_WP_EN connected to slg7x644092 at 68 */
>   	};
>   
>   	eeprom_cc: eeprom at 51 { /* required by spec - also at address 0x59 */
> +		bootph-all;
>   		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
>   		reg = <0x51>;
>   	};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index d01d4334c95f..51b8349dcacd 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -127,6 +127,7 @@ rproc_1_fw_image: memory at 3ef00000 {
>   	};
>   
>   	zynqmp_ipi: zynqmp_ipi {
> +		bootph-all;
>   		compatible = "xlnx,zynqmp-ipi-mailbox";
>   		interrupt-parent = <&gic>;
>   		interrupts = <0 35 4>;
> @@ -136,6 +137,7 @@ zynqmp_ipi: zynqmp_ipi {
>   		ranges;
>   
>   		ipi_mailbox_pmu1: mailbox at ff9905c0 {
> +			bootph-all;
>   			reg = <0x0 0xff9905c0 0x0 0x20>,
>   			      <0x0 0xff9905e0 0x0 0x20>,
>   			      <0x0 0xff990e80 0x0 0x20>,
> @@ -152,6 +154,7 @@ ipi_mailbox_pmu1: mailbox at ff9905c0 {
>   	dcc: dcc {
>   		compatible = "arm,dcc";
>   		status = "disabled";
> +		bootph-all;
>   	};
>   
>   	pmu {
> @@ -177,8 +180,10 @@ zynqmp_firmware: zynqmp-firmware {
>   			compatible = "xlnx,zynqmp-firmware";
>   			#power-domain-cells = <1>;
>   			method = "smc";
> +			bootph-all;
>   
>   			zynqmp_power: zynqmp-power {
> +				bootph-all;
>   				compatible = "xlnx,zynqmp-power";
>   				interrupt-parent = <&gic>;
>   				interrupts = <0 35 4>;
> @@ -258,6 +263,7 @@ r5f-1 {
>   
>   	amba: axi {
>   		compatible = "simple-bus";
> +		bootph-all;
>   		#address-cells = <2>;
>   		#size-cells = <2>;
>   		ranges;
> @@ -699,6 +705,7 @@ pcie_intc: legacy-interrupt-controller {
>   		};
>   
>   		qspi: spi at ff0f0000 {
> +			bootph-all;
>   			compatible = "xlnx,zynqmp-qspi-1.0";
>   			status = "disabled";
>   			clock-names = "ref_clk", "pclk";
> @@ -745,6 +752,7 @@ sata: ahci at fd0c0000 {
>   		};
>   
>   		sdhci0: mmc at ff160000 {
> +			bootph-all;
>   			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
>   			status = "disabled";
>   			interrupt-parent = <&gic>;
> @@ -759,6 +767,7 @@ sdhci0: mmc at ff160000 {
>   		};
>   
>   		sdhci1: mmc at ff170000 {
> +			bootph-all;
>   			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
>   			status = "disabled";
>   			interrupt-parent = <&gic>;
> @@ -851,6 +860,7 @@ ttc3: timer at ff140000 {
>   		};
>   
>   		uart0: serial at ff000000 {
> +			bootph-all;
>   			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
>   			status = "disabled";
>   			interrupt-parent = <&gic>;
> @@ -861,6 +871,7 @@ uart0: serial at ff000000 {
>   		};
>   
>   		uart1: serial at ff010000 {
> +			bootph-all;
>   			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
>   			status = "disabled";
>   			interrupt-parent = <&gic>;
> @@ -982,6 +993,7 @@ zynqmp_dpdma: dma-controller at fd4c0000 {
>   		};
>   
>   		zynqmp_dpsub: display at fd4a0000 {
> +			bootph-all;
>   			compatible = "xlnx,zynqmp-dpsub-1.7";
>   			status = "disabled";
>   			reg = <0x0 0xfd4a0000 0x0 0x1000>,

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs
TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs