[PATCH 23/23] arm64: zynqmp: Add phase tags marking

[Michal Simek]

bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

---
 arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi    |  6 ++++++
 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts |  3 +++
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi            | 12 ++++++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 581221fdadf1..719ea5d5ae88 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -11,30 +11,35 @@
 #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
 / {
 	pss_ref_clk: pss_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <33333333>;
 	};
 
 	video_clk: video_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 
 	pss_alt_ref_clk: pss_alt_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
 	gt_crx_ref_clk: gt_crx_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <108000000>;
 	};
 
 	aux_ref_clk: aux_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
@@ -43,6 +48,7 @@ aux_ref_clk: aux_ref_clk {
 
 &zynqmp_firmware {
 	zynqmp_clk: clock-controller {
+		bootph-all;
 		#clock-cells = <1>;
 		compatible = "xlnx,zynqmp-clk";
 		clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index 78ff6a9b3144..8afdf4408a78 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -243,17 +243,20 @@ tpm at 0 { /* slm9670 - U144 */
 
 &i2c1 {
 	status = "okay";
+	bootph-all;
 	clock-frequency = <400000>;
 	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
 	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 
 	eeprom: eeprom at 50 { /* u46 - also at address 0x58 */
+		bootph-all;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x50>;
 		/* WP pin EE_WP_EN connected to slg7x644092 at 68 */
 	};
 
 	eeprom_cc: eeprom at 51 { /* required by spec - also at address 0x59 */
+		bootph-all;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x51>;
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index d01d4334c95f..51b8349dcacd 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -127,6 +127,7 @@ rproc_1_fw_image: memory at 3ef00000 {
 	};
 
 	zynqmp_ipi: zynqmp_ipi {
+		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
 		interrupts = <0 35 4>;
@@ -136,6 +137,7 @@ zynqmp_ipi: zynqmp_ipi {
 		ranges;
 
 		ipi_mailbox_pmu1: mailbox at ff9905c0 {
+			bootph-all;
 			reg = <0x0 0xff9905c0 0x0 0x20>,
 			      <0x0 0xff9905e0 0x0 0x20>,
 			      <0x0 0xff990e80 0x0 0x20>,
@@ -152,6 +154,7 @@ ipi_mailbox_pmu1: mailbox at ff9905c0 {
 	dcc: dcc {
 		compatible = "arm,dcc";
 		status = "disabled";
+		bootph-all;
 	};
 
 	pmu {
@@ -177,8 +180,10 @@ zynqmp_firmware: zynqmp-firmware {
 			compatible = "xlnx,zynqmp-firmware";
 			#power-domain-cells = <1>;
 			method = "smc";
+			bootph-all;
 
 			zynqmp_power: zynqmp-power {
+				bootph-all;
 				compatible = "xlnx,zynqmp-power";
 				interrupt-parent = <&gic>;
 				interrupts = <0 35 4>;
@@ -258,6 +263,7 @@ r5f-1 {
 
 	amba: axi {
 		compatible = "simple-bus";
+		bootph-all;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -699,6 +705,7 @@ pcie_intc: legacy-interrupt-controller {
 		};
 
 		qspi: spi at ff0f0000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-qspi-1.0";
 			status = "disabled";
 			clock-names = "ref_clk", "pclk";
@@ -745,6 +752,7 @@ sata: ahci at fd0c0000 {
 		};
 
 		sdhci0: mmc at ff160000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
@@ -759,6 +767,7 @@ sdhci0: mmc at ff160000 {
 		};
 
 		sdhci1: mmc at ff170000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
@@ -851,6 +860,7 @@ ttc3: timer at ff140000 {
 		};
 
 		uart0: serial at ff000000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
@@ -861,6 +871,7 @@ uart0: serial at ff000000 {
 		};
 
 		uart1: serial at ff010000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
@@ -982,6 +993,7 @@ zynqmp_dpdma: dma-controller at fd4c0000 {
 		};
 
 		zynqmp_dpsub: display at fd4a0000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-dpsub-1.7";
 			status = "disabled";
 			reg = <0x0 0xfd4a0000 0x0 0x1000>,
-- 
2.36.1