[PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board

[Gregory CLEMENT]

Paweł Dembicki <paweldembicki at gmail.com> writes:

> śr., 30 lis 2022 o 01:18 Andrew Lunn <andrew at lunn.ch> napisał(a):
>>
>> On Mon, Oct 03, 2022 at 09:34:43AM +0200, Pawel Dembicki wrote:
>> > Add Endian 4i Edge 200 is 5-port firewall.
>> > It have also clone: Endian UTM Mini (The same hardware, with added WLAN
>> > card).
>> >
>> > Hardware:
>> >   - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
>> >   - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
>> >   - NAND Flash: 512MB (Micron 29F4G08AAC)
>> >   - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
>> >   - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
>> >   - Storage: MicroSD Slot
>> >   - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
>> >           (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
>> >   - USB: 1x USB 2.0 port
>> >   - Console: RJ-45 port
>> >   - LEDs: 3x GPIO controlled
>> >
>> > Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
>>
>> Reviewed-by: Andrew Lunn <andrew at lunn.ch>
>>
>>     Andrew
>
> Hi all,
>
> Gentle reminder for this patch.


Applied on mvebu/dt

Sorry to have missed it.

Thanks,

Gregory


>
> Best Regards,
> Paweł Dembicki

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com