[PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board

[Paweł Dembicki]

śr., 30 lis 2022 o 01:18 Andrew Lunn <andrew at lunn.ch> napisał(a):
>
> On Mon, Oct 03, 2022 at 09:34:43AM +0200, Pawel Dembicki wrote:
> > Add Endian 4i Edge 200 is 5-port firewall.
> > It have also clone: Endian UTM Mini (The same hardware, with added WLAN
> > card).
> >
> > Hardware:
> >   - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
> >   - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
> >   - NAND Flash: 512MB (Micron 29F4G08AAC)
> >   - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
> >   - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
> >   - Storage: MicroSD Slot
> >   - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
> >           (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
> >   - USB: 1x USB 2.0 port
> >   - Console: RJ-45 port
> >   - LEDs: 3x GPIO controlled
> >
> > Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
>
> Reviewed-by: Andrew Lunn <andrew at lunn.ch>
>
>     Andrew

Hi all,

Gentle reminder for this patch.

Best Regards,
Paweł Dembicki