[PATCH] arm64: dts: Change pinconf controller node name to pinctrl

[Tony Lindgren]

* Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> [230510 10:51]:
> On 10/05/2023 12:38, Tony Lindgren wrote:
> > According to the pinctrl binding pinmux and pinctrl are valid controller
> > names. Let's replace pinconf with pinctrl so we don't get new warnings
> > when pinctrl-singl yaml binding gets merged.
> > 
> > Cc: Conor Dooley <conor+dt at kernel.org>
> > Cc: Dinh Nguyen <dinguyen at kernel.org>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> > Cc: Niravkumar L Rabara <niravkumar.l.rabara at intel.com>
> > Cc: Ray Jui <rjui at broadcom.com>
> > Cc: Rob Herring <robh+dt at kernel.org>
> > Cc: Scott Branden <sbranden at broadcom.com>
> > Cc: Wei Xu <xuwei5 at hisilicon.com>
> > Signed-off-by: Tony Lindgren <tony at atomide.com>
> > ---
> >  arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi | 2 +-
> >  arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi              | 2 +-
> >  arch/arm64/boot/dts/intel/socfpga_agilex.dtsi               | 2 +-
> >  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> These should be either split by subsystem or you will have to push it
> through soc.

Let's see if Arnd cares to pick it up :)

Regards,

Tony