[PATCH] arm64: dts: Change pinconf controller node name to pinctrl

[Krzysztof Kozlowski]

On 10/05/2023 12:38, Tony Lindgren wrote:
> According to the pinctrl binding pinmux and pinctrl are valid controller
> names. Let's replace pinconf with pinctrl so we don't get new warnings
> when pinctrl-singl yaml binding gets merged.
> 
> Cc: Conor Dooley <conor+dt at kernel.org>
> Cc: Dinh Nguyen <dinguyen at kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> Cc: Niravkumar L Rabara <niravkumar.l.rabara at intel.com>
> Cc: Ray Jui <rjui at broadcom.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Scott Branden <sbranden at broadcom.com>
> Cc: Wei Xu <xuwei5 at hisilicon.com>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> ---
>  arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi | 2 +-
>  arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi              | 2 +-
>  arch/arm64/boot/dts/intel/socfpga_agilex.dtsi               | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)

These should be either split by subsystem or you will have to push it
through soc.

Best regards,
Krzysztof