[PATCH V3 7/7] arm64: dts: imx8mp: add interconnect for hsio blk ctrl

[Marco Felsch]

Hi Greg,

On 23-03-28, Greg Ungerer wrote:
> Hi Marco,
> 
> On 28/3/23 17:33, Marco Felsch wrote:
> > Hi Greg,
> > 
> > On 23-03-27, Greg Ungerer wrote:
> > > Hi Ahmad,
> > > 
> > > On 27/3/23 17:16, Ahmad Fatoum wrote:
> > > > On 27.03.23 08:27, Alexander Stein wrote:
> > > > > Am Montag, 27. März 2023, 06:50:37 CEST schrieb Greg Ungerer:
> > > > > > Any thoughts on why this breaks USB?
> > > > > 
> > > > > Maybe you are missing CONFIG_INTERCONNECT_IMX8MP?
> > > > 
> > > > And if that's the case, did you check /sys/kernel/debug/devices_deferred
> > > > to see if there was any indication that this is the reason?
> > > 
> > > Yeah, it does:
> > > 
> > >      # cat /sys/kernel/debug/devices_deferred
> > >      32f10100.usb	platform: supplier 32f10000.blk-ctrl not ready
> > >      32f10108.usb	platform: supplier 32f10000.blk-ctrl not ready
> > >      32ec0000.blk-ctrl	imx8m-blk-ctrl: failed to get noc entries
> > >      381f0040.usb-phy	platform: supplier 32f10000.blk-ctrl not ready
> > >      382f0040.usb-phy	platform: supplier 32f10000.blk-ctrl not ready
> > >      imx-pgc-domain.11	
> > >      imx-pgc-domain.12	
> > >      imx-pgc-domain.13	
> > >      38330000.blk-ctrl	platform: supplier imx-pgc-domain.11 not ready
> > >      32f10000.blk-ctrl	imx8mp-blk-ctrl: failed to get noc entries
> > > 
> > > As far as I can tell blk-ctrl should be good:
> > > 
> > >      #
> > >      # i.MX SoC drivers
> > >      #
> > >      CONFIG_IMX_GPCV2_PM_DOMAINS=y
> > >      CONFIG_SOC_IMX8M=y
> > >      # CONFIG_SOC_IMX9 is not set
> > >      CONFIG_IMX8M_BLK_CTRL=y
> > >      # end of i.MX SoC drivers
> > > 
> > > 
> > > > If you didn't find any hint there, you might want to place a
> > > > dev_err_probe with a suitable message at the place where -EPROBE_DEFER
> > > > was returned.
> > > 
> > > I will try that.
> > 
> > Can you check that CONFIG_ARM_IMX_BUS_DEVFREQ is enabled? This is the
> > noc/interconnect driver. This could also the problem for you vpu issue.
> 
> I do not have that enabled. Enabling that fixes the USB probing.
> So that is good, thanks.
> 
> It doesn't fix the other problem I mentioned with the vpu pgc nodes though.
> I do get some extra messages now with this enabled and the 6.1 kernel:
> 
>     imx-pgc imx-pgc-domain.8: failed to command PGC
>     imx-pgc imx-pgc-domain.8: failed to command PGC
>     imx8m-blk-ctrl 38330000.blk-ctrl: deferred probe timeout, ignoring dependency
>     imx8m-blk-ctrl 38330000.blk-ctrl: error -110: failed to attach power domain "g1"
>     imx8m-blk-ctrl: probe of 38330000.blk-ctrl failed with error -110

Okay, this seems more like a "real" issue not related to some missing
drivers. I followed the code and found a poll within the
imx_pgc_power_up() in gpcv2.c. Power-domain 8 is the vpumix domain which
is used as power-domain for the g1 power-domain. My assumption is that
this poll does run into the timeout. Maybe Peng can support you here
since I didn't had the time for to test the VPUs yet and he did the
integration patches.

Just ignore the errors if you don't use the VPUs or disable the
blk-ctrl at 38330000 node via status = "disabled".

Regards,
  Marco