[PATCH V3 7/7] arm64: dts: imx8mp: add interconnect for hsio blk ctrl

Greg Ungerer gerg at linux-m68k.org
Tue Mar 28 05:58:19 PDT 2023


Hi Marco,

On 28/3/23 17:33, Marco Felsch wrote:
> Hi Greg,
> 
> On 23-03-27, Greg Ungerer wrote:
>> Hi Ahmad,
>>
>> On 27/3/23 17:16, Ahmad Fatoum wrote:
>>> On 27.03.23 08:27, Alexander Stein wrote:
>>>> Am Montag, 27. März 2023, 06:50:37 CEST schrieb Greg Ungerer:
>>>>> Any thoughts on why this breaks USB?
>>>>
>>>> Maybe you are missing CONFIG_INTERCONNECT_IMX8MP?
>>>
>>> And if that's the case, did you check /sys/kernel/debug/devices_deferred
>>> to see if there was any indication that this is the reason?
>>
>> Yeah, it does:
>>
>>      # cat /sys/kernel/debug/devices_deferred
>>      32f10100.usb	platform: supplier 32f10000.blk-ctrl not ready
>>      32f10108.usb	platform: supplier 32f10000.blk-ctrl not ready
>>      32ec0000.blk-ctrl	imx8m-blk-ctrl: failed to get noc entries
>>      381f0040.usb-phy	platform: supplier 32f10000.blk-ctrl not ready
>>      382f0040.usb-phy	platform: supplier 32f10000.blk-ctrl not ready
>>      imx-pgc-domain.11	
>>      imx-pgc-domain.12	
>>      imx-pgc-domain.13	
>>      38330000.blk-ctrl	platform: supplier imx-pgc-domain.11 not ready
>>      32f10000.blk-ctrl	imx8mp-blk-ctrl: failed to get noc entries
>>
>> As far as I can tell blk-ctrl should be good:
>>
>>      #
>>      # i.MX SoC drivers
>>      #
>>      CONFIG_IMX_GPCV2_PM_DOMAINS=y
>>      CONFIG_SOC_IMX8M=y
>>      # CONFIG_SOC_IMX9 is not set
>>      CONFIG_IMX8M_BLK_CTRL=y
>>      # end of i.MX SoC drivers
>>
>>
>>> If you didn't find any hint there, you might want to place a
>>> dev_err_probe with a suitable message at the place where -EPROBE_DEFER
>>> was returned.
>>
>> I will try that.
> 
> Can you check that CONFIG_ARM_IMX_BUS_DEVFREQ is enabled? This is the
> noc/interconnect driver. This could also the problem for you vpu issue.

I do not have that enabled. Enabling that fixes the USB probing.
So that is good, thanks.

It doesn't fix the other problem I mentioned with the vpu pgc nodes though.
I do get some extra messages now with this enabled and the 6.1 kernel:

     imx-pgc imx-pgc-domain.8: failed to command PGC
     imx-pgc imx-pgc-domain.8: failed to command PGC
     imx8m-blk-ctrl 38330000.blk-ctrl: deferred probe timeout, ignoring dependency
     imx8m-blk-ctrl 38330000.blk-ctrl: error -110: failed to attach power domain "g1"
     imx8m-blk-ctrl: probe of 38330000.blk-ctrl failed with error -110

Regards
Greg





More information about the linux-arm-kernel mailing list