[PATCH V10 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
Devi Priya
quic_devipriy at quicinc.com
Tue Mar 28 00:31:33 PDT 2023
On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote:
> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy at quicinc.com> wrote:
>>
>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>> family of SoCs
>>
>> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>> ---
>> Changes in V10:
>> - Renamed the Board Device Tree Source to use the RDP numbers
>> - Updated the Makefile, subject and commit message accordingly
>>
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++
>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++
>> 3 files changed, 355 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 1a29403400b7..52f1f92c5195 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>> new file mode 100644
>> index 000000000000..2ce8e09e7565
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>> @@ -0,0 +1,84 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * IPQ9574 RDP433 board device tree source
>> + *
>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq9574.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
>> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
>> +
>> + aliases {
>> + serial0 = &blsp1_uart2;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&blsp1_uart2 {
>> + pinctrl-0 = <&uart2_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +};
>> +
>> +&sdhc_1 {
>> + pinctrl-0 = <&sdc_default_state>;
>> + pinctrl-names = "default";
>> + mmc-ddr-1_8v;
>> + mmc-hs200-1_8v;
>> + mmc-hs400-1_8v;
>> + mmc-hs400-enhanced-strobe;
>> + max-frequency = <384000000>;
>> + bus-width = <8>;
>> + status = "okay";
>> +};
>> +
>> +&sleep_clk {
>> + clock-frequency = <32000>;
>> +};
>> +
>> +&tlmm {
>> + sdc_default_state: sdc-default-state {
>> + clk-pins {
>> + pins = "gpio5";
>> + function = "sdc_clk";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "gpio4";
>> + function = "sdc_cmd";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "gpio0", "gpio1", "gpio2",
>> + "gpio3", "gpio6", "gpio7",
>> + "gpio8", "gpio9";
>> + function = "sdc_data";
>> + drive-strength = <8>;
>> + bias-pull-up;
>> + };
>> +
>> + rclk-pins {
>> + pins = "gpio10";
>> + function = "sdc_rclk";
>> + drive-strength = <8>;
>> + bias-pull-down;
>> + };
>> + };
>> +};
>> +
>> +&xo_board_clk {
>> + clock-frequency = <24000000>;
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> new file mode 100644
>> index 000000000000..3bb7435f5e7f
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> @@ -0,0 +1,270 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * IPQ9574 SoC device tree source
>> + *
>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + clocks {
>> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <353000000>;
>> + #clock-cells = <0>;
>> + };
>
> What is the source for this clock? With it clocking at 353 MHz, I
> doubt that it is an external clock.
bias_pll_ubi_nc_clk (353MHz)is a backup source
for Q6_AXIM2_CLK/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK
It is from the CMN_PLL, and is the same as that of PPE core clock.
Do you suggest to move its clock-frequency to Board DT similar to
xo/sleep clock?
>
>> +
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> +
>> + xo_board_clk: xo-board-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> + };
>
> [skipped the rest]
>
Regards,
Devi Priya
More information about the linux-arm-kernel
mailing list