[PATCH V10 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant

[Dmitry Baryshkov]

On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy at quicinc.com> wrote:
>
> Add initial device tree support for Qualcomm IPQ9574 SoC and
> Reference Design Platform(RDP) 433 which is based on IPQ9574
> family of SoCs
>
> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> Co-developed-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> ---
>  Changes in V10:
>         - Renamed the Board Device Tree Source to use the RDP numbers
>         - Updated the Makefile, subject and commit message accordingly
>
>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts |  84 ++++++
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 270 ++++++++++++++++++++
>  3 files changed, 355 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 1a29403400b7..52f1f92c5195 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk10-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk10-c2.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += ipq9574-rdp433.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += msm8916-acer-a1-724.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += msm8916-alcatel-idol347.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += msm8916-asus-z00l.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> new file mode 100644
> index 000000000000..2ce8e09e7565
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> @@ -0,0 +1,84 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * IPQ9574 RDP433 board device tree source
> + *
> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq9574.dtsi"
> +
> +/ {
> +       model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
> +       compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
> +
> +       aliases {
> +               serial0 = &blsp1_uart2;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +};
> +
> +&blsp1_uart2 {
> +       pinctrl-0 = <&uart2_pins>;
> +       pinctrl-names = "default";
> +       status = "okay";
> +};
> +
> +&sdhc_1 {
> +       pinctrl-0 = <&sdc_default_state>;
> +       pinctrl-names = "default";
> +       mmc-ddr-1_8v;
> +       mmc-hs200-1_8v;
> +       mmc-hs400-1_8v;
> +       mmc-hs400-enhanced-strobe;
> +       max-frequency = <384000000>;
> +       bus-width = <8>;
> +       status = "okay";
> +};
> +
> +&sleep_clk {
> +       clock-frequency = <32000>;
> +};
> +
> +&tlmm {
> +       sdc_default_state: sdc-default-state {
> +               clk-pins {
> +                       pins = "gpio5";
> +                       function = "sdc_clk";
> +                       drive-strength = <8>;
> +                       bias-disable;
> +               };
> +
> +               cmd-pins {
> +                       pins = "gpio4";
> +                       function = "sdc_cmd";
> +                       drive-strength = <8>;
> +                       bias-pull-up;
> +               };
> +
> +               data-pins {
> +                       pins = "gpio0", "gpio1", "gpio2",
> +                              "gpio3", "gpio6", "gpio7",
> +                              "gpio8", "gpio9";
> +                       function = "sdc_data";
> +                       drive-strength = <8>;
> +                       bias-pull-up;
> +               };
> +
> +               rclk-pins {
> +                       pins = "gpio10";
> +                       function = "sdc_rclk";
> +                       drive-strength = <8>;
> +                       bias-pull-down;
> +               };
> +       };
> +};
> +
> +&xo_board_clk {
> +       clock-frequency = <24000000>;
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> new file mode 100644
> index 000000000000..3bb7435f5e7f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -0,0 +1,270 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * IPQ9574 SoC device tree source
> + *
> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
> +
> +/ {
> +       interrupt-parent = <&intc>;
> +       #address-cells = <2>;
> +       #size-cells = <2>;
> +
> +       clocks {
> +               bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
> +                       compatible = "fixed-clock";
> +                       clock-frequency = <353000000>;
> +                       #clock-cells = <0>;
> +               };

What is the source for this clock? With it clocking at 353 MHz, I
doubt that it is an external clock.

> +
> +               sleep_clk: sleep-clk {
> +                       compatible = "fixed-clock";
> +                       #clock-cells = <0>;
> +               };
> +
> +               xo_board_clk: xo-board-clk {
> +                       compatible = "fixed-clock";
> +                       #clock-cells = <0>;
> +               };
> +       };

[skipped the rest]

-- 
With best wishes
Dmitry