[PATCH v11 1/2] arm64: dts: imx8mm-evkb: add support for i.MX8MM-EVKB
Marco Felsch
m.felsch at pengutronix.de
Tue Mar 7 00:57:47 PST 2023
Hi Shawn,
On 23-03-07, Shawn Guo wrote:
> On Mon, Jan 30, 2023 at 06:25:52PM +0100, Johannes Schneider wrote:
> > Add devicetree for the EVKB, which comes with LPDDR4 and a different
> > PMIC.
> >
> > The regulator min/max values are taken from the evk's schematic:
> > 8MMINILPD4-CPU SPF-31399_C2.pdf
> >
> > Signed-off-by: Johannes Schneider <johannes.schneider at leica-geosystems.com>
>
> The patch doesn't compile at all (see below), so I took a closer look
> and decided to drop the series.
>
> > ---
> > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 134 ++++++++++++++++++
> > 2 files changed, 135 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > index 3ea9edc87909..3bccc4d10928 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
>
> I prefer to name it imx8mm-evk-revb.dtb or imx8mm-evk-b.dtb.
Unfortunately it's not revision B, it is evkb. The 'first' evk has
plenty revisions. I think the most recent for the imx8mm-evk is C5. For
the imx8mm-evkb the most recent revision is A4. Even this is not 100
percent correct since the EVK consist of a SoM and a baseboard. The
baseboard isn't changed for the EVKB but the SoM. The new SoM schematics
name the new SoM 8MMINILPD4-CPU2. But in the end you can't buy it
separately:
- https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> > new file mode 100644
> > index 000000000000..2c3947d68982
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> > @@ -0,0 +1,134 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2019-2022 NXP
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx8mm-evk.dtsi"
> > +
> > +/ {
> > + model = "FSL i.MX8MM EVKB"; // with LPDDR4 and PCA9450 PMIC
>
> "FSL i.MX8MM EVK Revision B"
Please see my above explanation, it's not revision b.
>
> imx8mm-evk board has LPDDR4 too, so LPDDR4 is not a difference. It
> seems PMIC is the only difference between imx8mm-evk and imx8mm-evk-b.
> In that case, we may want to include "imx8mm-evk.dts" rather than
> "imx8mm-evk.dtsi". Otherwise, things like flexspi and usdhc3 get lost.
Your're right.
Regards,
Marco
> Also /* ... */ style of comment is recommended.
>
> > + compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
>
> "fsl,imx8mm-evk-revb" or "fsl,imx8mm-evk-b"
>
> > +};
> > +
> > +&i2c1 {
> > + /*
> > + * replace "rohm,bd71847" pmic found on previous evks
> > + * with "nxp,pca9450a"
> > + */
> > + /delete-node/ pmic at 4b
>
> Missing semicolon causes DTC error.
>
> /delete-node/ pmic at 4b;
>
> Shawn
>
> > +
> > + pmic: pmic at 25 {
> > + compatible = "nxp,pca9450a";
> > + reg = <0x25>;
> > + pinctrl-0 = <&pinctrl_pmic>;
> > + pinctrl-names = "default";
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + regulators {
> > + // VDD_SOC_0V8
> > + buck1_reg: BUCK1 {
> > + regulator-name = "BUCK1";
> > + regulator-min-microvolt = <780000>;
> > + regulator-max-microvolt = <900000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + regulator-ramp-delay = <1250>;
> > + };
> > +
> > + // VDD_ARM_0V9
> > + buck2_reg: BUCK2 {
> > + regulator-name = "BUCK2";
> > + regulator-min-microvolt = <805000>;
> > + regulator-max-microvolt = <1050000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + regulator-ramp-delay = <1250>;
> > + nxp,dvs-standby-voltage = <850000>;
> > + };
> > +
> > + // VDD_DRAM&PU_0V9 (BUCK5 in datasheet)
> > + buck3_reg: BUCK3 {
> > + regulator-name = "BUCK3";
> > + regulator-min-microvolt = <805000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // VDD_3V3/NVCC_3V3 (BUCK6 in datasheet)
> > + buck4_reg: BUCK4 {
> > + regulator-name = "BUCK4";
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3600000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // VDD_1V8/NVCC_1V8 (BUCK7 in datasheet)
> > + buck5_reg: BUCK5 {
> > + regulator-name = "BUCK5";
> > + regulator-min-microvolt = <1650000>;
> > + regulator-max-microvolt = <1950000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // NVCC_DRAM_1V1 (BUCK8 in datasheet)
> > + buck6_reg: BUCK6 {
> > + regulator-name = "BUCK6";
> > + regulator-min-microvolt = <1060000>;
> > + regulator-max-microvolt = <1140000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // NVCC_SNVS_1V8
> > + ldo1_reg: LDO1 {
> > + regulator-name = "LDO1";
> > + regulator-min-microvolt = <1620000>;
> > + regulator-max-microvolt = <19800000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // VDD_SNVS_0V8
> > + ldo2_reg: LDO2 {
> > + regulator-name = "LDO2";
> > + regulator-min-microvolt = <760000>;
> > + regulator-max-microvolt = <900000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // VDDA_1V8
> > + ldo3_reg: LDO3 {
> > + regulator-name = "LDO3";
> > + regulator-min-microvolt = <1710000>;
> > + regulator-max-microvolt = <1890000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // VDD_PHY_0V9
> > + ldo4_reg: LDO4 {
> > + regulator-name = "LDO4";
> > + regulator-min-microvolt = <855000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + // VDD_PHY_1V2 (LDO6 in datasheet)
> > + ldo5_reg: LDO5 {
> > + regulator-name = "LDO5";
> > + regulator-min-microvolt = <1140000>;
> > + regulator-max-microvolt = <1260000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > + };
> > + };
> > +};
> > --
> > 2.25.1
> >
>
>
More information about the linux-arm-kernel
mailing list