[PATCH v11 1/2] arm64: dts: imx8mm-evkb: add support for i.MX8MM-EVKB

[Shawn Guo]

On Mon, Jan 30, 2023 at 06:25:52PM +0100, Johannes Schneider wrote:
> Add devicetree for the EVKB, which comes with LPDDR4 and a different
> PMIC.
> 
> The regulator min/max values are taken from the evk's schematic:
> 8MMINILPD4-CPU  SPF-31399_C2.pdf
> 
> Signed-off-by: Johannes Schneider <johannes.schneider at leica-geosystems.com>

The patch doesn't compile at all (see below), so I took a closer look
and decided to drop the series.

> ---
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 134 ++++++++++++++++++
>  2 files changed, 135 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 3ea9edc87909..3bccc4d10928 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb

I prefer to name it imx8mm-evk-revb.dtb or imx8mm-evk-b.dtb.

>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> new file mode 100644
> index 000000000000..2c3947d68982
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> @@ -0,0 +1,134 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2019-2022 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-evk.dtsi"
> +
> +/ {
> +	model = "FSL i.MX8MM EVKB"; // with LPDDR4 and PCA9450 PMIC

"FSL i.MX8MM EVK Revision B"

imx8mm-evk board has LPDDR4 too, so LPDDR4 is not a difference.  It
seems PMIC is the only difference between imx8mm-evk and imx8mm-evk-b.
In that case, we may want to include "imx8mm-evk.dts" rather than
"imx8mm-evk.dtsi".  Otherwise, things like flexspi and usdhc3 get lost.

Also /* ... */ style of comment is recommended.

> +	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";

"fsl,imx8mm-evk-revb" or "fsl,imx8mm-evk-b"

> +};
> +
> +&i2c1 {
> +	/*
> +	 * replace "rohm,bd71847" pmic found on previous evks
> +	 * with "nxp,pca9450a"
> +	 */
> +	/delete-node/ pmic at 4b

Missing semicolon causes DTC error.

	/delete-node/ pmic at 4b;

Shawn

> +
> +	pmic: pmic at 25 {
> +		compatible = "nxp,pca9450a";
> +		reg = <0x25>;
> +		pinctrl-0 = <&pinctrl_pmic>;
> +		pinctrl-names = "default";
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> +		regulators {
> +			// VDD_SOC_0V8
> +			buck1_reg: BUCK1 {
> +				regulator-name = "BUCK1";
> +				regulator-min-microvolt = <780000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <1250>;
> +			};
> +
> +			// VDD_ARM_0V9
> +			buck2_reg: BUCK2 {
> +				regulator-name = "BUCK2";
> +				regulator-min-microvolt = <805000>;
> +				regulator-max-microvolt = <1050000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <1250>;
> +				nxp,dvs-standby-voltage = <850000>;
> +			};
> +
> +			// VDD_DRAM&PU_0V9 (BUCK5 in datasheet)
> +			buck3_reg: BUCK3 {
> +				regulator-name = "BUCK3";
> +				regulator-min-microvolt = <805000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// VDD_3V3/NVCC_3V3 (BUCK6 in datasheet)
> +			buck4_reg: BUCK4 {
> +				regulator-name = "BUCK4";
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3600000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// VDD_1V8/NVCC_1V8 (BUCK7 in datasheet)
> +			buck5_reg: BUCK5 {
> +				regulator-name = "BUCK5";
> +				regulator-min-microvolt = <1650000>;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// NVCC_DRAM_1V1 (BUCK8 in datasheet)
> +			buck6_reg: BUCK6 {
> +				regulator-name = "BUCK6";
> +				regulator-min-microvolt = <1060000>;
> +				regulator-max-microvolt = <1140000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// NVCC_SNVS_1V8
> +			ldo1_reg: LDO1 {
> +				regulator-name = "LDO1";
> +				regulator-min-microvolt = <1620000>;
> +				regulator-max-microvolt = <19800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// VDD_SNVS_0V8
> +			ldo2_reg: LDO2 {
> +				regulator-name = "LDO2";
> +				regulator-min-microvolt = <760000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// VDDA_1V8
> +			ldo3_reg: LDO3 {
> +				regulator-name = "LDO3";
> +				regulator-min-microvolt = <1710000>;
> +				regulator-max-microvolt = <1890000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// VDD_PHY_0V9
> +			ldo4_reg: LDO4 {
> +				regulator-name = "LDO4";
> +				regulator-min-microvolt = <855000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			// VDD_PHY_1V2 (LDO6 in datasheet)
> +			ldo5_reg: LDO5 {
> +				regulator-name = "LDO5";
> +				regulator-min-microvolt = <1140000>;
> +				regulator-max-microvolt = <1260000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.25.1
>