[PATCH v9 10/10] ARM: dts: stm32: add STM32MP1-based Phytec board

[Alexandre TORGUE]

Hi Christophe

On 6/23/23 10:59, Christophe Parant wrote:
> Hello maintainers,
> 
> I would like to know if you have seen my request below ?
> 
> Thank you.
> 
> Best regards,
> Christophe
> 
> Le mardi 23 mai 2023 à 16:58 +0200, Christophe Parant a écrit :
>> Hi Steffen,
>>
>> Thank you for upstreaming our phyBOARD-Sargas device tree. We were
>> also
>> planing to work on that too.
>> If this patch is not applied upstream yet, would it be possible to
>> rename the .dts file ?
>>
>> In the beginning, we named the dts files after our Yocto machines,
>> which is probably the version you got. But now we renamed them after
>> our baseboard names, like with our other platforms.
>> So it would make sense to have the stm32 baseboard named the same
>> way,
>> changing "stm32mp157c-phycore-stm32mp1-3.dts" to "stm32mp157c-
>> phyboard-
>> sargas-rdk-emmc.dts".
>>

It has been sent with the old name. If it is really needed you need to 
send a patch (yaml + DT update) with a fixes tag. I'll send it to 
arm-soc during v6.5 rc cycle.

Alex

>> "model" and "compatible" can also be modified this way with this
>> naming
>> convention :
>>
>> / {
>>      model = "PHYTEC phyBOARD-Sargas STM32MP157C with eMMC";
>>      compatible = "phytec,stm32mp157c-phyboard-sargas-rdk-emmc",
>>               "phytec,stm32mp157c-phycore-som", "st,stm32mp157";
>> };
>>
>> Thanks.
>>
>> Best regards,
>> Christophe Parant
>>
>> Le vendredi 05 mai 2023 à 08:01 +0200, Steffen Trumtrar a écrit :
>>> Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
>>> stm32m157c-som.
>>>
>>> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
>>> ---
>>>
>>> Notes:
>>>      Changes since v7:
>>>         - remove secure-status for sdmmc
>>>
>>>   arch/arm/boot/dts/Makefile                    |  3 +-
>>>   .../dts/stm32mp157c-phycore-stm32mp1-3.dts    | 60
>>> +++++++++++++++++++
>>>   2 files changed, 62 insertions(+), 1 deletion(-)
>>>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-
>>> 3.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile
>>> b/arch/arm/boot/dts/Makefile
>>> index efe4152e5846..dfa9a7477c82 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -1252,7 +1252,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
>>>          stm32mp157c-ev1.dtb \
>>>          stm32mp157c-ev1-scmi.dtb \
>>>          stm32mp157c-lxa-mc1.dtb \
>>> -       stm32mp157c-odyssey.dtb
>>> +       stm32mp157c-odyssey.dtb \
>>> +       stm32mp157c-phycore-stm32mp1-3.dtb
>>>   dtb-$(CONFIG_MACH_SUN4I) += \
>>>          sun4i-a10-a1000.dtb \
>>>          sun4i-a10-ba10-tvbox.dtb \
>>> diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
>>> b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
>>> new file mode 100644
>>> index 000000000000..28d7203264ce
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
>>> @@ -0,0 +1,60 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
>>> + * Author: Dom VOVARD <dom.vovard at linrt.com>.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include <dt-bindings/pinctrl/stm32-pinfunc.h>
>>> +#include "stm32mp157.dtsi"
>>> +#include "stm32mp15xc.dtsi"
>>> +#include "stm32mp15xxac-pinctrl.dtsi"
>>> +#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
>>> +
>>> +/ {
>>> +       model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
>>> +       compatible = "phytec,phycore-stm32mp1-3",
>>> +                    "phytec,phycore-stm32mp157c-som",
>>> "st,stm32mp157";
>>> +
>>> +       aliases {
>>> +               mmc0 = &sdmmc1;
>>> +               mmc1 = &sdmmc2;
>>> +               mmc2 = &sdmmc3;
>>> +               serial0 = &uart4;
>>> +               serial1 = &usart3;
>>> +               serial2 = &usart1;
>>> +       };
>>> +};
>>> +
>>> +&cryp1 {
>>> +       status = "okay";
>>> +};
>>> +
>>> +&dts {
>>> +       status = "okay";
>>> +};
>>> +
>>> +&fmc {
>>> +       status = "disabled";
>>> +};
>>> +
>>> +&gpu {
>>> +       status = "okay";
>>> +};
>>> +
>>> +&i2c4_eeprom {
>>> +       status = "okay";
>>> +};
>>> +
>>> +&i2c4_rtc {
>>> +       status = "okay";
>>> +};
>>> +
>>> +&qspi {
>>> +       status = "okay";
>>> +};
>>> +
>>> +&sdmmc2 {
>>> +       status = "okay";
>>> +};