[PATCH v9 10/10] ARM: dts: stm32: add STM32MP1-based Phytec board

[Christophe Parant]

Hello maintainers,

I would like to know if you have seen my request below ?

Thank you.

Best regards,
Christophe

Le mardi 23 mai 2023 à 16:58 +0200, Christophe Parant a écrit :
> Hi Steffen,
> 
> Thank you for upstreaming our phyBOARD-Sargas device tree. We were
> also
> planing to work on that too.
> If this patch is not applied upstream yet, would it be possible to
> rename the .dts file ?
> 
> In the beginning, we named the dts files after our Yocto machines,
> which is probably the version you got. But now we renamed them after
> our baseboard names, like with our other platforms.
> So it would make sense to have the stm32 baseboard named the same
> way,
> changing "stm32mp157c-phycore-stm32mp1-3.dts" to "stm32mp157c-
> phyboard-
> sargas-rdk-emmc.dts".
> 
> "model" and "compatible" can also be modified this way with this
> naming
> convention :
> 
> / {
>     model = "PHYTEC phyBOARD-Sargas STM32MP157C with eMMC";
>     compatible = "phytec,stm32mp157c-phyboard-sargas-rdk-emmc",
>              "phytec,stm32mp157c-phycore-som", "st,stm32mp157";
> };
> 
> Thanks.
> 
> Best regards,
> Christophe Parant
> 
> Le vendredi 05 mai 2023 à 08:01 +0200, Steffen Trumtrar a écrit :
> > Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
> > stm32m157c-som.
> > 
> > Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> > ---
> > 
> > Notes:
> >     Changes since v7:
> >        - remove secure-status for sdmmc
> > 
> >  arch/arm/boot/dts/Makefile                    |  3 +-
> >  .../dts/stm32mp157c-phycore-stm32mp1-3.dts    | 60
> > +++++++++++++++++++
> >  2 files changed, 62 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-
> > 3.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile
> > b/arch/arm/boot/dts/Makefile
> > index efe4152e5846..dfa9a7477c82 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1252,7 +1252,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
> >         stm32mp157c-ev1.dtb \
> >         stm32mp157c-ev1-scmi.dtb \
> >         stm32mp157c-lxa-mc1.dtb \
> > -       stm32mp157c-odyssey.dtb
> > +       stm32mp157c-odyssey.dtb \
> > +       stm32mp157c-phycore-stm32mp1-3.dtb
> >  dtb-$(CONFIG_MACH_SUN4I) += \
> >         sun4i-a10-a1000.dtb \
> >         sun4i-a10-ba10-tvbox.dtb \
> > diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
> > b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
> > new file mode 100644
> > index 000000000000..28d7203264ce
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
> > @@ -0,0 +1,60 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > +/*
> > + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
> > + * Author: Dom VOVARD <dom.vovard at linrt.com>.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/pinctrl/stm32-pinfunc.h>
> > +#include "stm32mp157.dtsi"
> > +#include "stm32mp15xc.dtsi"
> > +#include "stm32mp15xxac-pinctrl.dtsi"
> > +#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
> > +
> > +/ {
> > +       model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
> > +       compatible = "phytec,phycore-stm32mp1-3",
> > +                    "phytec,phycore-stm32mp157c-som",
> > "st,stm32mp157";
> > +
> > +       aliases {
> > +               mmc0 = &sdmmc1;
> > +               mmc1 = &sdmmc2;
> > +               mmc2 = &sdmmc3;
> > +               serial0 = &uart4;
> > +               serial1 = &usart3;
> > +               serial2 = &usart1;
> > +       };
> > +};
> > +
> > +&cryp1 {
> > +       status = "okay";
> > +};
> > +
> > +&dts {
> > +       status = "okay";
> > +};
> > +
> > +&fmc {
> > +       status = "disabled";
> > +};
> > +
> > +&gpu {
> > +       status = "okay";
> > +};
> > +
> > +&i2c4_eeprom {
> > +       status = "okay";
> > +};
> > +
> > +&i2c4_rtc {
> > +       status = "okay";
> > +};
> > +
> > +&qspi {
> > +       status = "okay";
> > +};
> > +
> > +&sdmmc2 {
> > +       status = "okay";
> > +};