[EXT] Re: [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP
Sandor Yu
sandor.yu at nxp.com
Sun Jun 18 20:10:54 PDT 2023
Hi Alexander,
Thanks for your comments,
> -----Original Message-----
> From: Alexander Stein <alexander.stein at ew.tq-group.com>
> Sent: 2023年6月16日 17:32
> To: andrzej.hajda at intel.com; neil.armstrong at linaro.org;
> robert.foss at linaro.org; Laurent.pinchart at ideasonboard.com;
> jonas at kwiboo.se; jernej.skrabec at gmail.com; airlied at gmail.com;
> daniel at ffwll.ch; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org;
> shawnguo at kernel.org; s.hauer at pengutronix.de; festevam at gmail.com;
> vkoul at kernel.org; dri-devel at lists.freedesktop.org;
> devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; linux-phy at lists.infradead.org
> Cc: Oliver Brown <oliver.brown at nxp.com>; Sandor Yu <sandor.yu at nxp.com>;
> dl-linux-imx <linux-imx at nxp.com>; kernel at pengutronix.de; Sandor Yu
> <sandor.yu at nxp.com>
> Subject: [EXT] Re: [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence
> MHDP8501 HDMI and DP
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> Hi Sandor,
>
> Am Donnerstag, 15. Juni 2023, 03:38:12 CEST schrieb Sandor Yu:
> > Add bindings for Cadence MHDP8501 DisplayPort and HDMI driver.
> >
> > Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> > ---
> > .../display/bridge/cdns,mhdp8501.yaml | 105
> ++++++++++++++++++
> > 1 file changed, 105 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> > b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> > new file mode 100644 index 000000000000..a54756815e6f
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.y
> > +++ aml
> > @@ -0,0 +1,105 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devi/
> >
> +cetree.org%2Fschemas%2Fdisplay%2Fbridge%2Fcdns%2Cmhdp8501.yaml%
> 23&dat
> >
> +a=05%7C01%7CSandor.yu%40nxp.com%7C6ef2c732b3674cb2896c08db6e4
> c827b%7C
> >
> +686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63822504710561225
> 8%7CUnkno
> >
> +wn%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1
> haWwi
> >
> +LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=DGYYt2LQ%2FhlNBVd2m0s
> aXTm9IoKKwn
> > +X7CTTplhbLxcI%3D&reserved=0
> > +$schema:
> > +http://devi/
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7CSandor.
> yu%40n
> >
> +xp.com%7C6ef2c732b3674cb2896c08db6e4c827b%7C686ea1d3bc2b4c6fa9
> 2cd99c5
> >
> +c301635%7C0%7C0%7C638225047105612258%7CUnknown%7CTWFpbGZs
> b3d8eyJWIjoi
> >
> +MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3
> 000%7C%
> >
> +7C%7C&sdata=SkTFYM7HHgJmFUkyo3Ftf%2B8FdGqlnty0Ch6ggwSPeLY%3D
> &reserved
> > +=0
> > +
> > +title: Cadence MHDP8501 Displayport bridge
> > +
> > +maintainers:
> > + - Sandor Yu <Sandor.yu at nxp.com>
> > +
> > +description:
> > + The Cadence MHDP8501 Displayport/HDMI TX interface.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - cdns,mhdp8501-dp
> > + - cdns,mhdp8501-hdmi
> > + - fsl,imx8mq-mhdp8501-dp
> > + - fsl,imx8mq-mhdp8501-hdmi
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > + description: MHDP8501 DP/HDMI APB clock.
> > +
> > + phys:
> > + maxItems: 1
> > +
> > + interrupts:
> > + items:
> > + - description: Hotplug cable plugin.
> > + - description: Hotplug cable plugout.
> > +
> > + interrupt-names:
> > + items:
> > + - const: plug_in
> > + - const: plug_out
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port at 0:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Input port from display controller output.
> > + port at 1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Output port to DP/HDMI connector.
> > +
> > + required:
> > + - port at 0
> > + - port at 1
>
> You mark these ports as required, but apparently the drivers do not use them,
> AFAICT. E.g. missing port at 1 is not resulting in an error, at lease for HDMI one.
>
Yes, port at 1 is not really needed, I add it just to follow HDMI/DP framework that same as other platforms in community code.
B.R
Sandor
> Best regards,
> Alexander
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - interrupts
> > + - interrupt-names
> > + - phys
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/imx8mq-clock.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + mhdp_dp: dp-bridge at 32c00000 {
> > + compatible = "fsl,imx8mq-mhdp8501-dp";
> > + reg = <0x32c00000 0x100000>;
> > + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "plug_in", "plug_out";
> > + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> > + phys = <&dp_phy>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port at 0 {
> > + reg = <0>;
> > +
> > + mhdp_in: endpoint {
> > + remote-endpoint = <&dcss_out>;
> > + };
> > + };
> > +
> > + port at 1 {
> > + reg = <1>;
> > +
> > + mhdp_out: endpoint {
> > + remote-endpoint = <&dp_con>;
> > + };
> > + };
> > + };
> > + };
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.tq/
> -group.com%2F&data=05%7C01%7CSandor.yu%40nxp.com%7C6ef2c732b367
> 4cb2896c08db6e4c827b%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C
> 0%7C638225047105612258%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4w
> LjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
> %7C%7C&sdata=xJdLi2HJ72ShBwT%2FfUdZ3uLx%2FIJEPmTQJHGVXe0JVik%3
> D&reserved=0
>
More information about the linux-arm-kernel
mailing list