[PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP

[Alexander Stein]

Hi Sandor,

Am Donnerstag, 15. Juni 2023, 03:38:12 CEST schrieb Sandor Yu:
> Add bindings for Cadence MHDP8501 DisplayPort and HDMI driver.
> 
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> ---
>  .../display/bridge/cdns,mhdp8501.yaml         | 105 ++++++++++++++++++
>  1 file changed, 105 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> 
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml new
> file mode 100644
> index 000000000000..a54756815e6f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> @@ -0,0 +1,105 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8501.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cadence MHDP8501 Displayport bridge
> +
> +maintainers:
> +  - Sandor Yu <Sandor.yu at nxp.com>
> +
> +description:
> +  The Cadence MHDP8501 Displayport/HDMI TX interface.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cdns,mhdp8501-dp
> +      - cdns,mhdp8501-hdmi
> +      - fsl,imx8mq-mhdp8501-dp
> +      - fsl,imx8mq-mhdp8501-hdmi
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: MHDP8501 DP/HDMI APB clock.
> +
> +  phys:
> +    maxItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: Hotplug cable plugin.
> +      - description: Hotplug cable plugout.
> +
> +  interrupt-names:
> +    items:
> +      - const: plug_in
> +      - const: plug_out
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port from display controller output.
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port to DP/HDMI connector.
> +
> +    required:
> +      - port at 0
> +      - port at 1

You mark these ports as required, but apparently the drivers do not use them, 
AFAICT. E.g. missing port at 1 is not resulting in an error, at lease for HDMI 
one.

Best regards,
Alexander

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +  - interrupt-names
> +  - phys
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    mhdp_dp: dp-bridge at 32c00000 {
> +        compatible = "fsl,imx8mq-mhdp8501-dp";
> +        reg = <0x32c00000 0x100000>;
> +        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "plug_in", "plug_out";
> +        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> +        phys = <&dp_phy>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port at 0 {
> +                reg = <0>;
> +
> +                mhdp_in: endpoint {
> +                    remote-endpoint = <&dcss_out>;
> +                };
> +            };
> +
> +            port at 1 {
> +                reg = <1>;
> +
> +                mhdp_out: endpoint {
> +                    remote-endpoint = <&dp_con>;
> +                };
> +            };
> +        };
> +    };


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/