[PATCH 6/9] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver
Manikandan.M at microchip.com
Manikandan.M at microchip.com
Thu Jun 15 00:31:41 PDT 2023
On 14/06/23 12:40, Claudiu Beznea - M18063 wrote:
> On 13.06.2023 10:04, Manikandan Muralidharan wrote:
>> - XLCDC in SAM9X7 has different sets of registers and additional
>> configuration bits when compared to previous HLCDC IP. Read/write
>> operation on the controller registers is now separated using the
>> XLCDC status flag.
>> - HEO scaling, window resampling, Alpha blending, YUV-to-RGB
>> conversion in XLCDC is derived and handled using additional
>> configuration bits and registers.
>> - Writing one to the Enable fields of each layer in LCD_ATTRE
>> is required to reflect the values set in Configuration, FBA, Enable
>> registers of each layer
>>
>> Signed-off-by: Manikandan Muralidharan <manikandan.m at microchip.com>
>> [Hari.PrasathGE at microchip.com: update the attribute field for each layer]
>> Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE at microchip.com>
>> [durai.manickamkr at microchip.com: implement status flag to seprate register update]
>> Signed-off-by: Durai Manickam KR <durai.manickamkr at microchip.com>
>> ---
>> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 28 +-
>> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 297 ++++++++++++++----
>> 2 files changed, 256 insertions(+), 69 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> index 58184cd6ab0b..7c9cf7c0c75d 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> @@ -139,10 +139,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
>> state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
>> cfg = state->output_mode << 8;
>>
>> - if (adj->flags & DRM_MODE_FLAG_NVSYNC)
>> + if (!crtc->dc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
>> cfg |= ATMEL_HLCDC_VSPOL;
>>
>> - if (adj->flags & DRM_MODE_FLAG_NHSYNC)
>> + if (!crtc->dc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
>> cfg |= ATMEL_HLCDC_HSPOL;
>>
>> regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
>> @@ -177,6 +177,18 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
>>
>> pm_runtime_get_sync(dev->dev);
>>
>> + if (crtc->dc->is_xlcdc) {
>> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
>> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
>> + (status & ATMEL_XLCDC_CM))
>> + cpu_relax();
>
> A timeout would be god here to avoid potential infinite loop (for different
> reasons). You can check regmap_read_poll_timeout(). Same for the rest of
> while loops above.
I will address all the comments given, Thank you.
>
>> +
>> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
>> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
>> + !(status & ATMEL_XLCDC_SD))
>> + cpu_relax();
>> + }
>> +
>> regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
>> while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
>> (status & ATMEL_HLCDC_DISP))
>> @@ -231,6 +243,18 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
>> !(status & ATMEL_HLCDC_DISP))
>> cpu_relax();
>>
>> + if (crtc->dc->is_xlcdc) {
>> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
>> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
>> + !(status & ATMEL_XLCDC_CM))
>> + cpu_relax();
>> +
>> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
>> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
>> + (status & ATMEL_XLCDC_SD))
>> + cpu_relax();
>> + }
>> +
>> pm_runtime_put_sync(dev->dev);
>>
>> }
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
>> index daa508504f47..fe33476818c4 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
>> @@ -330,11 +330,59 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
>> yfactor));
>> }
>>
>> +static void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
>> + struct atmel_hlcdc_plane_state *state)
>> +{
>> + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
>> + u32 xfactor, yfactor;
>> +
>> + if (!desc->layout.scaler_config)
>> + return;
>> +
>> + if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.scaler_config, 0);
>> + return;
>> + }
>> +
>> + /* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
>> + xfactor = (1048576 * state->src_w) / state->crtc_w;
>> +
>> + /* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
>> + yfactor = (1048576 * state->src_h) / state->crtc_h;
>> +
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
>> + ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
>> + ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
>> + ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
>> + ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
>> +
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
>> + yfactor);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
>> + xfactor);
>> +
>> + /* As per YCbCr window resampling configuration */
>> + if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
>> + yfactor / 2);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
>> + xfactor / 2);
>> + } else {
>> + /* As per ARGB window resampling configuration */
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
>> + yfactor);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
>> + xfactor);
>> + }
>> +}
>> +
>> static void
>> atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
>> struct atmel_hlcdc_plane_state *state)
>> {
>> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
>> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>>
>> if (desc->layout.size)
>> atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
>> @@ -352,7 +400,10 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
>> ATMEL_HLCDC_LAYER_POS(state->crtc_x,
>> state->crtc_y));
>>
>> - atmel_hlcdc_plane_setup_scaler(plane, state);
>> + if (!(dc->is_xlcdc))
>
> You can reverse the logic here to avoid !dc->is_xlcdc. Also, no need for ()
> around dc->is_xlcdc
>
>> + atmel_hlcdc_plane_setup_scaler(plane, state);
>> + else
>> + atmel_xlcdc_plane_setup_scaler(plane, state);
>> }
>>
>> static void
>> @@ -362,33 +413,58 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
>> unsigned int cfg = ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id;
>> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
>> const struct drm_format_info *format = state->base.fb->format;
>> -
>
> extra line
>
>> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>> /*
>> * Rotation optimization is not working on RGB888 (rotation is still
>> * working but without any optimization).
>> */
>> - if (format->format == DRM_FORMAT_RGB888)
>> + if ((!(dc->is_xlcdc)) && format->format == DRM_FORMAT_RGB888)
>
> No need for extra ().
>
>> cfg |= ATMEL_HLCDC_LAYER_DMA_ROTDIS;
>>
>> - atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_HLCDC_LAYER_DMA_CFG,
>> - cfg);
>> + if (!(dc->is_xlcdc)) {
>
> no need for extra ()
>
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_HLCDC_LAYER_DMA_CFG,
>> + cfg);
>>
>> - cfg = ATMEL_HLCDC_LAYER_DMA | ATMEL_HLCDC_LAYER_REP;
>> + cfg = ATMEL_HLCDC_LAYER_DMA | ATMEL_HLCDC_LAYER_REP;
>> + } else {
>> + atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
>> + cfg);
>> +
>> + cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
>> + }
>>
>> if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
>> - cfg |= ATMEL_HLCDC_LAYER_OVR | ATMEL_HLCDC_LAYER_ITER2BL |
>> - ATMEL_HLCDC_LAYER_ITER;
>> + if (!(dc->is_xlcdc)) {
>
> no need for extra (). Same for the rest of occurencies above. Also, you can
> reverse the logic to avoid ! in front of (dc->is_xlcdc)
>
>> + cfg |= ATMEL_HLCDC_LAYER_OVR | ATMEL_HLCDC_LAYER_ITER2BL |
>> + ATMEL_HLCDC_LAYER_ITER;
>> +
>> + if (format->has_alpha)
>> + cfg |= ATMEL_HLCDC_LAYER_LAEN;
>> + else
>> + cfg |= ATMEL_HLCDC_LAYER_GAEN |
>> + ATMEL_HLCDC_LAYER_GA(state->base.alpha);
>> + } else {
>> + /*
>> + * Alpha Blending bits specific to SAM9X7 SoC
>> + */
>> + cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
>> + ATMEL_XLCDC_LAYER_SFACTA_ONE |
>> + ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
>> + ATMEL_XLCDC_LAYER_DFACTA_ONE;
>> + if (format->has_alpha)
>> + cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
>> + else
>> + cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
>> + }
>> + }
>>
>> - if (format->has_alpha)
>> - cfg |= ATMEL_HLCDC_LAYER_LAEN;
>> + if (state->disc_h && state->disc_w) {
>> + if (!(dc->is_xlcdc))
>> + cfg |= ATMEL_HLCDC_LAYER_DISCEN;
>> else
>> - cfg |= ATMEL_HLCDC_LAYER_GAEN |
>> - ATMEL_HLCDC_LAYER_GA(state->base.alpha);
>> + cfg |= ATMEL_XLCDC_LAYER_DISCEN;
>> }
>>
>> - if (state->disc_h && state->disc_w)
>> - cfg |= ATMEL_HLCDC_LAYER_DISCEN;
>> -
>> atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
>> cfg);
>> }
>> @@ -441,33 +517,42 @@ static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
>> struct atmel_hlcdc_plane_state *state)
>> {
>> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
>> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>> struct drm_framebuffer *fb = state->base.fb;
>> u32 sr;
>> int i;
>>
>> - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
>> + if (!(dc->is_xlcdc))
>
> You can reverse the logic
>
>> + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
>> + else
>> + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR);
>>
>> for (i = 0; i < state->nplanes; i++) {
>> struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
>>
>> state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];
>>
>> - atmel_hlcdc_layer_write_reg(&plane->layer,
>> - ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
>> - state->dscrs[i]->self);
>> -
>> - if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
>> - atmel_hlcdc_layer_write_reg(&plane->layer,
>> - ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
>> - state->dscrs[i]->addr);
>> + if (!(dc->is_xlcdc)) {
>
> you can reverse the logic
>
>> atmel_hlcdc_layer_write_reg(&plane->layer,
>> - ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
>> - state->dscrs[i]->ctrl);
>> + ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
>> + state->dscrs[i]->self);
>> +
>> + if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
>> + atmel_hlcdc_layer_write_reg(&plane->layer,
>> + ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
>> + state->dscrs[i]->addr);
>> + atmel_hlcdc_layer_write_reg(&plane->layer,
>> + ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
>> + state->dscrs[i]->ctrl);
>> + atmel_hlcdc_layer_write_reg(&plane->layer,
>> + ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
>> + state->dscrs[i]->self);
>> + }
>> + } else {
>> atmel_hlcdc_layer_write_reg(&plane->layer,
>> - ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
>> - state->dscrs[i]->self);
>> + ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
>> + state->dscrs[i]->addr);
>> }
>> -
>> if (desc->layout.xstride[i])
>> atmel_hlcdc_layer_write_cfg(&plane->layer,
>> desc->layout.xstride[i],
>> @@ -716,19 +801,31 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
>> struct drm_atomic_state *state)
>> {
>> struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
>> -
>
> You can keep this line afte the above variable.
>
>> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>> /* Disable interrupts */
>> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
>> - 0xffffffff);
>> + if (!(dc->is_xlcdc))
>
> you can reverse the logic
>
>> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
>> + 0xffffffff);
>> + else
>> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
>> + 0xffffffff);
>>
>> /* Disable the layer */
>> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHDR,
>> - ATMEL_HLCDC_LAYER_RST |
>> - ATMEL_HLCDC_LAYER_A2Q |
>> - ATMEL_HLCDC_LAYER_UPDATE);
>> + if (!(dc->is_xlcdc))
>
> same here.
>
>> + atmel_hlcdc_layer_write_reg(&plane->layer,
>> + ATMEL_HLCDC_LAYER_CHDR,
>> + ATMEL_HLCDC_LAYER_RST |
>> + ATMEL_HLCDC_LAYER_A2Q |
>> + ATMEL_HLCDC_LAYER_UPDATE);
>> + else
>> + atmel_hlcdc_layer_write_reg(&plane->layer,
>> + ATMEL_XLCDC_LAYER_ENR, 0);
>>
>> /* Clear all pending interrupts */
>> - atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>> + if (!(dc->is_xlcdc))
>> + atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>> + else
>> + atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
>> }
>>
>> static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
>> @@ -739,6 +836,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
>> struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
>> struct atmel_hlcdc_plane_state *hstate =
>> drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
>> + struct atmel_hlcdc_dc *dc = p->dev->dev_private;
>> u32 sr;
>>
>> if (!new_s->crtc || !new_s->fb)
>> @@ -756,23 +854,46 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
>> atmel_hlcdc_plane_update_buffers(plane, hstate);
>> atmel_hlcdc_plane_update_disc_area(plane, hstate);
>>
>> - /* Enable the overrun interrupts. */
>> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
>> - ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
>> - ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
>> - ATMEL_HLCDC_LAYER_OVR_IRQ(2));
>> -
>> - /* Apply the new config at the next SOF event. */
>> - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
>> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
>> - ATMEL_HLCDC_LAYER_UPDATE |
>> - (sr & ATMEL_HLCDC_LAYER_EN ?
>> - ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
>> + if (!(dc->is_xlcdc)) {
>
> same here
>
>> + /* Enable the overrun interrupts. */
>> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
>> + ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
>> + ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
>> + ATMEL_HLCDC_LAYER_OVR_IRQ(2));
>> +
>> + /* Apply the new config at the next SOF event. */
>> + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
>> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
>> + ATMEL_HLCDC_LAYER_UPDATE |
>> + (sr & ATMEL_HLCDC_LAYER_EN ?
>> + ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
>> + } else {
>> + /* Enable the overrun interrupts. */
>> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
>> + ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
>> + ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
>> + ATMEL_XLCDC_LAYER_OVR_IRQ(2));
>> +
>> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
>> + ATMEL_XLCDC_LAYER_EN);
>> + }
>> +
>> + /*
>> + * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
>> + * (where xxx indicates each layer) requires writing one to the
>> + * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
>> + */
>> + if (dc->is_xlcdc) {
>> + regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
>> + ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
>> + ATMEL_XLCDC_HEO_UPDATE);
>> + }
>> }
>>
>> static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
>> {
>> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
>> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>>
>> if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
>> desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
>> @@ -796,20 +917,50 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
>> return ret;
>> }
>>
>> - if (desc->layout.csc) {
>> + if (!(dc->is_xlcdc)) {
>
> you can reverse the logic
>
>> + if (desc->layout.csc) {
>> + /*
>> + * TODO: decare a "yuv-to-rgb-conv-factors" property to let
>> + * userspace modify these factors (using a BLOB property ?).
>> + */
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc,
>> + 0x4c900091);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 1,
>> + 0x7a5f5090);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 2,
>> + 0x40040890);
>> + }
>> + } else {
>> /*
>> - * TODO: decare a "yuv-to-rgb-conv-factors" property to let
>> - * userspace modify these factors (using a BLOB property ?).
>> + * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
>> + * LCDC_HEOCFG21 registers in SAM9X7.
>> */
>> - atmel_hlcdc_layer_write_cfg(&plane->layer,
>> - desc->layout.csc,
>> - 0x4c900091);
>> - atmel_hlcdc_layer_write_cfg(&plane->layer,
>> - desc->layout.csc + 1,
>> - 0x7a5f5090);
>> - atmel_hlcdc_layer_write_cfg(&plane->layer,
>> - desc->layout.csc + 2,
>> - 0x40040890);
>> + if (desc->layout.csc) {
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc,
>> + 0x00000488);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 1,
>> + 0x00000648);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 2,
>> + 0x1EA00480);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 3,
>> + 0x00001D28);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 4,
>> + 0x08100480);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 5,
>> + 0x00000000);
>> + atmel_hlcdc_layer_write_cfg(&plane->layer,
>> + desc->layout.csc + 6,
>> + 0x00000007);
>> + }
>> }
>>
>> return 0;
>> @@ -819,19 +970,31 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
>> {
>> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
>> u32 isr;
>> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>>
>> - isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>> + if (!(dc->is_xlcdc))
>
> same here.
>
>> + isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>> + else
>> + isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
>>
>> /*
>> * There's not much we can do in case of overrun except informing
>> * the user. However, we are in interrupt context here, hence the
>> * use of dev_dbg().
>> */
>> - if (isr &
>> - (ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
>> - ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
>> - dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
>> - desc->name);
>> + if (!(dc->is_xlcdc)) {
>> + if (isr &
>> + (ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
>> + ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
>> + dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
>> + desc->name);
>> + } else {
>> + if (isr &
>> + (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
>> + ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
>> + dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
>> + desc->name);
>> + }
>> }
>>
>> static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
>
--
Thanks and Regards,
Manikandan M.
More information about the linux-arm-kernel
mailing list