[PATCH] clk: imx: composite-8m: Add imx8m_divider_determine_rate

[Maxime Ripard]

On Sun, Jun 11, 2023 at 12:02:42PM -0500, Adam Ford wrote:
> On Tue, Jun 6, 2023 at 1:45 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > On Sat, May 6, 2023 at 4:53 PM Adam Ford <aford173 at gmail.com> wrote:
> > >
> > > Currently, certain clocks are derrived as a divider from their
> > > parent clock.  For some clocks, even when CLK_SET_RATE_PARENT
> > > is set, the parent clock is not properly set which can lead
> > > to some relatively inaccurate clock values.
> > >
> 
> + Maxime
> 
> > > Unlike imx/clk-composite-93 and imx/clk-divider-gate, it
> > > cannot rely on calling a standard determine_rate function,
> > > because the 8m composite clocks have a pre-divider and
> > > post-divider. Because of this, a custom determine_rate
> > > function is necessary to determine the maximum clock
> > > division which is equivalent to pre-divider * the
> > > post-divider.
> > >
> > > With this added, the system can attempt to adjust the parent rate
> > > when the proper flags are set which can lead to a more precise clock
> > > value.
> > >
> > > On the imx8mplus, no clock changes are present.
> > > On the Mini and Nano, this can help achieve more accurate
> > > lcdif clocks. When trying to get a pixel clock of 31.500MHz
> > > on an imx8m Nano, the clocks divided the 594MHz down, but
> > > left the parent rate untouched which caused a calulation error.
> > >
> > > Before:
> > > video_pll              594000000
> > >   video_pll_bypass     594000000
> > >     video_pll_out      594000000
> > >       disp_pixel       31263158
> > >         disp_pixel_clk 31263158
> > >
> > > Variance = -236842 Hz
> > >
> > > After this patch:
> > > video_pll               31500000
> > >   video_pll_bypass      31500000
> > >     video_pll_out       31500000
> > >       disp_pixel        31500000
> > >         disp_pixel_clk  31500000
> > >
> > > Variance = 0 Hz
> > >
> > > All other clocks rates and parent were the same.
> > > Similar results on imx8mm were found.
> > >
> > > Fixes: 690dccc4a0bf ("Revert "clk: imx: composite-8m: Add support to determine_rate"")
> > > Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> 
> Peng / Abel,
> 
> Any suggestions on how we can move this forward?  Looking at the
> clk-composite-8m driver, imx8m_clk_composite_compute_dividers uses the
> max values which is basically what my patch does.  There was some
> discussion about making determine_rate mandatory for muxes[1] and this
> patch should help with this in addition to making it easier to sync
> more video resolutions on the 8m Mini and Nano.

Those patches have been queued by Stephen for 6.6 :)

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230612/78832bb5/attachment-0001.sig>