[GIT PULL] Qualcomm driver updates for v6.3
Bjorn Andersson
andersson at kernel.org
Thu Jan 26 08:30:08 PST 2023
The following changes since commit 6049aae52392539e505bfb8ccbcff3c26f1d2f0b:
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe() (2023-01-10 09:48:13 -0600)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-drivers-for-6.3
for you to fetch changes up to 6bf32599223634294cdc6efb359ffaab1d68073c:
firmware: qcom: scm: Add wait-queue handling logic (2023-01-18 21:14:40 -0600)
----------------------------------------------------------------
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
----------------------------------------------------------------
AngeloGioacchino Del Regno (2):
dt-bindings: soc: qcom: Add bindings for Qualcomm Ramp Controller
soc: qcom: Add Qualcomm Ramp Controller driver
Bagas Sanjaya (2):
soc: qcom: dcc: Fix examples list on /sys/kernel/debug/dcc/.../[list-number]/config documentation
soc: qcom: dcc: rewrite description of dcc sysfs files
Bartosz Golaszewski (2):
dt-bindings: power: qcom,rpmpd: document sa8775p
soc: qcom: rmphpd: add power domains for sa8775p
Bjorn Andersson (4):
soc: qcom: ramp_controller: Include linux/bitfield.h
soc: qcom: ramp_controller: Make things static
Merge branch '20230109130523.298971-3-konrad.dybcio at linaro.org' into drivers-for-6.3
Merge tag 'qcom-driver-fixes-for-6.2' into drivers-for-6.3
Bryan O'Donoghue (1):
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
Dawei Li (1):
soc: qcom: apr: make remove callback of apr driver void returned
Guru Das Srinagesh (2):
dt-bindings: firmware: qcom,scm: Add optional interrupt
firmware: qcom: scm: Add wait-queue handling logic
Konrad Dybcio (4):
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
Revert "soc: qcom: rpmpd: Add SM4250 support"
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Krzysztof Kozlowski (2):
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
Loic Poulain (1):
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
Melody Olvera (1):
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
Naman Jain (1):
soc: qcom: socinfo: Add support for new fields in revision 16
Neil Armstrong (1):
dt-bindings: soc: qcom: convert non-smd RPM bindings to dt-schema
Souradeep Chowdhury (3):
dt-bindings: soc: qcom,dcc: Add the dtschema
soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)
MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support
Stephan Gerhold (4):
soc: qcom: socinfo: Fix soc_id order
dt-bindings: arm: qcom,ids: Add QRD board ID
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
soc: qcom: socinfo: Add a bunch of older SoCs
Yang Li (1):
soc: qcom: dcc: Fix unsigned comparison with less than zero
Documentation/ABI/testing/debugfs-driver-dcc | 127 ++
.../devicetree/bindings/firmware/qcom,scm.yaml | 64 +-
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 283 -----
.../devicetree/bindings/power/qcom,rpmpd.yaml | 2 +-
.../bindings/reserved-memory/qcom,rmtfs-mem.yaml | 6 +-
.../devicetree/bindings/soc/qcom/qcom,dcc.yaml | 44 +
.../soc/qcom/qcom,msm8976-ramp-controller.yaml | 36 +
.../devicetree/bindings/soc/qcom/qcom,rpm.yaml | 101 ++
.../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 1 +
MAINTAINERS | 8 +
drivers/firmware/qcom_scm-smc.c | 86 +-
drivers/firmware/qcom_scm.c | 90 +-
drivers/firmware/qcom_scm.h | 8 +
drivers/soc/qcom/Kconfig | 17 +
drivers/soc/qcom/Makefile | 2 +
drivers/soc/qcom/dcc.c | 1300 ++++++++++++++++++++
drivers/soc/qcom/ramp_controller.c | 343 ++++++
drivers/soc/qcom/rmtfs_mem.c | 29 +-
drivers/soc/qcom/rpmhpd.c | 34 +
drivers/soc/qcom/rpmpd.c | 18 -
drivers/soc/qcom/socinfo.c | 96 +-
include/dt-bindings/arm/qcom,ids.h | 75 ++
include/dt-bindings/firmware/qcom,scm.h | 16 +
include/dt-bindings/power/qcom-rpmpd.h | 29 +-
include/linux/qcom_scm.h | 6 +-
include/linux/soc/qcom/apr.h | 2 +-
sound/soc/qcom/qdsp6/q6core.c | 4 +-
27 files changed, 2480 insertions(+), 347 deletions(-)
create mode 100644 Documentation/ABI/testing/debugfs-driver-dcc
delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
create mode 100644 drivers/soc/qcom/dcc.c
create mode 100644 drivers/soc/qcom/ramp_controller.c
create mode 100644 include/dt-bindings/firmware/qcom,scm.h
More information about the linux-arm-kernel
mailing list