[PATCH v7 1/4] arm64: dts: qcom: sc8280xp: Define some of the display blocks

Konrad Dybcio konrad.dybcio at linaro.org
Wed Jan 11 04:10:14 PST 2023



On 11.01.2023 04:59, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson at linaro.org>
> 
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
> 
> Changes since v6:
> - Dropped assigned-clock-rate on MDP_CLK
> - Rearranged the properties in all nodes
> 
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 811 +++++++++++++++++++++++++
>  1 file changed, 811 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 0ea2f19d471b..2ed17baf50d3 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -4,6 +4,7 @@
>   * Copyright (c) 2022, Linaro Limited
>   */
>  
> +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
>  #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/interconnect/qcom,osm-l3.h>
> @@ -2097,6 +2098,42 @@ usb_1_qmpphy: phy at 8903000 {
>  			status = "disabled";
>  		};
>  
> +		mdss1_dp0_phy: phy at 8909a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x08909a00 0 0x19c>,
> +			      <0 0x08909200 0 0xec>,
> +			      <0 0x08909600 0 0xec>,
> +			      <0 0x08909000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		mdss1_dp1_phy: phy at 890ca00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x0890ca00 0 0x19c>,
> +			      <0 0x0890c200 0 0xec>,
> +			      <0 0x0890c600 0 0xec>,
> +			      <0 0x0890c000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>  		pmu at 9091000 {
>  			compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
>  			reg = <0 0x9091000 0 0x1000>;
> @@ -2303,6 +2340,314 @@ usb_1_dwc3: usb at a800000 {
>  			};
>  		};
>  
> +		mdss0: display-subsystem at ae00000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x0ae00000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +			iommus = <&apps_smmu 0x1000 0x402>;
> +			power-domains = <&dispcc0 MDSS_GDSC>;
> +			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			status = "disabled";
> +
> +			mdss0_mdp: display-controller at ae01000 {
> +				compatible = "qcom,sc8280xp-dpu";
> +				reg = <0 0x0ae01000 0 0x8f000>,
> +				      <0 0x0aeb0000 0 0x2008>;
> +				reg-names = "mdp", "vbif";
> +
> +				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +					 <&gcc GCC_DISP_SF_AXI_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> +				clock-names = "bus",
> +					      "nrt_bus",
> +					      "iface",
> +					      "lut",
> +					      "core",
> +					      "vsync";
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <0>;
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> +				assigned-clock-rates = <19200000>;
> +				operating-points-v2 = <&mdss0_mdp_opp_table>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 5 {
> +						reg = <5>;
> +						mdss0_intf5_out: endpoint {
> +							remote-endpoint = <&mdss0_dp3_in>;
> +						};
> +					};
> +
> +					port at 6 {
> +						reg = <6>;
> +						mdss0_intf6_out: endpoint {
> +							remote-endpoint = <&mdss0_dp2_in>;
> +						};
> +					};
> +				};
> +
> +				mdss0_mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-200000000 {
> +						opp-hz = /bits/ 64 <200000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-300000000 {
> +						opp-hz = /bits/ 64 <300000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-375000000 {
> +						opp-hz = /bits/ 64 <375000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-500000000 {
> +						opp-hz = /bits/ 64 <500000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +					opp-600000000 {
> +						opp-hz = /bits/ 64 <600000000>;
> +						required-opps = <&rpmhpd_opp_turbo_l1>;
> +					};
> +				};
> +			};
> +
> +			mdss0_dp2: displayport-controller at ae9a000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0xae9a000 0 0x200>,
> +				      <0 0xae9a200 0 0x200>,
> +				      <0 0xae9a400 0 0x600>,
> +				      <0 0xae9b000 0 0x400>;
> +
> +				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <14>;
> +				phys = <&mdss0_dp2_phy>;
> +				phy-names = "dp";
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
> +						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
> +				operating-points-v2 = <&mdss0_dp2_opp_table>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss0_dp2_in: endpoint {
> +							remote-endpoint = <&mdss0_intf6_out>;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss0_dp2_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss0_dp3: displayport-controller at aea0000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0xaea0000 0 0x200>,
> +				      <0 0xaea0200 0 0x200>,
> +				      <0 0xaea0400 0 0x600>,
> +				      <0 0xaea1000 0 0x400>;
> +
> +				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <15>;
> +				phys = <&mdss0_dp3_phy>;
> +				phy-names = "dp";
> +				power-domains = <&dispcc0 MDSS_GDSC>;
> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
> +						  <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
> +				operating-points-v2 = <&mdss0_dp3_opp_table>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss0_dp3_in: endpoint {
> +							remote-endpoint = <&mdss0_intf5_out>;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss0_dp3_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +		};
> +
> +		mdss0_dp2_phy: phy at aec2a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x0aec2a00 0 0x19c>,
> +			      <0 0x0aec2200 0 0xec>,
> +			      <0 0x0aec2600 0 0xec>,
> +			      <0 0x0aec2000 0 0x1c8>;
> +
> +			clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		mdss0_dp3_phy: phy at aec5a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x0aec5a00 0 0x19c>,
> +			      <0 0x0aec5200 0 0xec>,
> +			      <0 0x0aec5600 0 0xec>,
> +			      <0 0x0aec5000 0 0x1c8>;
> +
> +			clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		dispcc0: clock-controller at af00000 {
> +			compatible = "qcom,sc8280xp-dispcc0";
> +			reg = <0 0x0af00000 0 0x20000>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <&sleep_clk>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <&mdss0_dp2_phy 0>,
> +				 <&mdss0_dp2_phy 1>,
> +				 <&mdss0_dp3_phy 0>,
> +				 <&mdss0_dp3_phy 1>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>;
> +			power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +			#clock-cells = <1>;
> +			#power-domain-cells = <1>;
> +			#reset-cells = <1>;
> +
> +			status = "disabled";
> +		};
> +
>  		pdc: interrupt-controller at b220000 {
>  			compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
>  			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
> @@ -2925,6 +3270,472 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
>  				qcom,remote-pid = <12>;
>  			};
>  		};
> +
> +		mdss1: display-subsystem at 22000000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x22000000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +
> +			iommus = <&apps_smmu 0x1800 0x402>;
> +			power-domains = <&dispcc1 MDSS_GDSC>;
> +			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
> +
> +			#interrupt-cells = <1>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			status = "disabled";
> +
> +			mdss1_mdp: display-controller at 22001000 {
> +				compatible = "qcom,sc8280xp-dpu";
> +				reg = <0 0x22001000 0 0x8f000>,
> +				      <0 0x220b0000 0 0x2008>;
> +				reg-names = "mdp", "vbif";
> +
> +				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +					 <&gcc GCC_DISP_SF_AXI_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
> +				clock-names = "bus",
> +					      "nrt_bus",
> +					      "iface",
> +					      "lut",
> +					      "core",
> +					      "vsync";
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <0>;
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
> +				assigned-clock-rates = <19200000>;
> +				operating-points-v2 = <&mdss1_mdp_opp_table>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss1_intf0_out: endpoint {
> +							remote-endpoint = <&mdss1_dp0_in>;
> +						};
> +					};
> +
> +					port at 4 {
> +						reg = <4>;
> +						mdss1_intf4_out: endpoint {
> +							remote-endpoint = <&mdss1_dp1_in>;
> +						};
> +					};
> +
> +					port at 5 {
> +						reg = <5>;
> +						mdss1_intf5_out: endpoint {
> +							remote-endpoint = <&mdss1_dp3_in>;
> +						};
> +					};
> +
> +					port at 6 {
> +						reg = <6>;
> +						mdss1_intf6_out: endpoint {
> +							remote-endpoint = <&mdss1_dp2_in>;
> +						};
> +					};
> +				};
> +
> +				mdss1_mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-200000000 {
> +						opp-hz = /bits/ 64 <200000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-300000000 {
> +						opp-hz = /bits/ 64 <300000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-375000000 {
> +						opp-hz = /bits/ 64 <375000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-500000000 {
> +						opp-hz = /bits/ 64 <500000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +					opp-600000000 {
> +						opp-hz = /bits/ 64 <600000000>;
> +						required-opps = <&rpmhpd_opp_turbo_l1>;
> +					};
> +				};
> +			};
> +
> +			mdss1_dp0: displayport-controller at 22090000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x22090000 0 0x200>,
> +				      <0 0x22090200 0 0x200>,
> +				      <0 0x22090400 0 0x600>,
> +				      <0 0x22091000 0 0x400>;
> +
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <12>;
> +				phys = <&mdss1_dp0_phy>;
> +				phy-names = "dp";
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
> +				operating-points-v2 = <&mdss1_dp0_opp_table>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss1_dp0_in: endpoint {
> +							remote-endpoint = <&mdss1_intf0_out>;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp0_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +
> +			};
> +
> +			mdss1_dp1: displayport-controller at 22098000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x22098000 0 0x200>,
> +				      <0 0x22098200 0 0x200>,
> +				      <0 0x22098400 0 0x600>,
> +				      <0 0x22099000 0 0x400>;
> +
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <13>;
> +				phys = <&mdss1_dp1_phy>;
> +				phy-names = "dp";
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
> +				operating-points-v2 = <&mdss1_dp1_opp_table>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss1_dp1_in: endpoint {
> +							remote-endpoint = <&mdss1_intf4_out>;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp1_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss1_dp2: displayport-controller at 2209a000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x2209a000 0 0x200>,
> +				      <0 0x2209a200 0 0x200>,
> +				      <0 0x2209a400 0 0x600>,
> +				      <0 0x2209b000 0 0x400>;
> +
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <14>;
> +				phys = <&mdss1_dp2_phy>;
> +				phy-names = "dp";
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
> +				operating-points-v2 = <&mdss1_dp2_opp_table>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss1_dp2_in: endpoint {
> +							remote-endpoint = <&mdss1_intf6_out>;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp2_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss1_dp3: displayport-controller at 220a0000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x220a0000 0 0x200>,
> +				      <0 0x220a0200 0 0x200>,
> +				      <0 0x220a0400 0 0x600>,
> +				      <0 0x220a1000 0 0x400>;
> +
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <15>;
> +				phys = <&mdss1_dp3_phy>;
> +				phy-names = "dp";
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
> +				operating-points-v2 = <&mdss1_dp3_opp_table>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss1_dp3_in: endpoint {
> +							remote-endpoint = <&mdss1_intf5_out>;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp3_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +		};
> +
> +		mdss1_dp2_phy: phy at 220c2a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x220c2a00 0 0x19c>,
> +			      <0 0x220c2200 0 0xec>,
> +			      <0 0x220c2600 0 0xec>,
> +			      <0 0x220c2000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		mdss1_dp3_phy: phy at 220c5a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x220c5a00 0 0x19c>,
> +			      <0 0x220c5200 0 0xec>,
> +			      <0 0x220c5600 0 0xec>,
> +			      <0 0x220c5000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		dispcc1: clock-controller at 22100000 {
> +			compatible = "qcom,sc8280xp-dispcc1";
> +			reg = <0 0x22100000 0 0x20000>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <0>,
> +				 <&mdss1_dp0_phy 0>,
> +				 <&mdss1_dp0_phy 1>,
> +				 <&mdss1_dp1_phy 0>,
> +				 <&mdss1_dp1_phy 1>,
> +				 <&mdss1_dp2_phy 0>,
> +				 <&mdss1_dp2_phy 1>,
> +				 <&mdss1_dp3_phy 0>,
> +				 <&mdss1_dp3_phy 1>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>;
> +			power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +			#clock-cells = <1>;
> +			#power-domain-cells = <1>;
> +			#reset-cells = <1>;
> +
> +			status = "disabled";
> +		};
>  	};
>  
>  	sound: sound {



More information about the linux-arm-kernel mailing list