[PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI

[Vignesh Raghavendra]

On 22/11/22 15:46, Matt Ranostay wrote:
> From: Aswath Govindraju <a-govindraju at ti.com>
> 
> Add support for two instance of OSPI in J721S2 SoC.
> 
> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
> Signed-off-by: Matt Ranostay <mranostay at ti.com>
> ---
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 0af242aa9816..a588ab8d867b 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -306,4 +306,44 @@ cpts at 3d000 {
>  			ti,cpts-periodic-outputs = <2>;
>  		};
>  	};
> +
> +	fss: syscon at 47000000 {

Node needs to be renamed as bus@<> as the compatible is "simple-bus"

+/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon at 47000000: $nodename:0: 'syscon at 47000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'


> +		compatible = "simple-bus";
> +		reg = <0x00 0x47000000 0x00 0x100>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ospi0: spi at 47040000 {
> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";
> +			reg = <0x00 0x47040000 0x00 0x100>,
> +			      <0x5 0x0000000 0x1 0x0000000>;
> +			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> +			cdns,fifo-depth = <256>;
> +			cdns,fifo-width = <4>;
> +			cdns,trigger-address = <0x0>;
> +			clocks = <&k3_clks 109 5>;
> +			assigned-clocks = <&k3_clks 109 5>;
> +			assigned-clock-parents = <&k3_clks 109 7>;
> +			assigned-clock-rates = <166666666>;
> +			power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		ospi1: spi at 47050000 {
> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";
> +			reg = <0x00 0x47050000 0x00 0x100>,
> +			      <0x7 0x0000000 0x1 0x0000000>;
> +			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> +			cdns,fifo-depth = <256>;
> +			cdns,fifo-width = <4>;
> +			cdns,trigger-address = <0x0>;
> +			clocks = <&k3_clks 110 5>;
> +			power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +	};
>  };

-- 
Regards
Vignesh