[PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

[Vignesh Raghavendra]

[...]

On 22/11/22 15:46, Matt Ranostay wrote:
> +#include <dt-bindings/phy/phy-cadence.h>
> +#include <dt-bindings/phy/phy-ti.h>
> +
> +/ {
> +	serdes_refclk: clock-cmnrefclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <0>;
> +	};
> +};
> +
>  &cbass_main {
>  	msmc_ram: sram at 70000000 {
>  		compatible = "mmio-sram";
> @@ -38,6 +49,13 @@ usb_serdes_mux: mux-controller-0 {
>  			#mux-control-cells = <1>;
>  			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
>  		};
> +
> +		serdes_ln_ctrl: mux-controller-80 {

Same as previous patch:

+/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon at 104000: 'mux-controller-0', 'mux-controller-80' do not match any of the regexes: '^clock-controller@[0-9a-f]+$', '^mux-controller@[0-9a-f]+$', 'phy@[0-9a-f]+$', 'pinctrl-[0-9]+'


> +			compatible = "mmio-mux";
> +			#mux-control-cells = <1>;
> +			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
> +					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
> +		};
>  	};

[...]

-- 
Regards
Vignesh