[PATCH 0/2] Allwinner power domain support

[Jernej Škrabec]

Dne sobota, 31. december 2022 ob 17:04:00 CET je Samuel Holland napisal(a):
> This series adds support for the power controller found in D1 and other
> recent Allwinner SoCs. There is no first-party documentation, but there
> are a couple of vendor drivers for different hardware revisions[1][2],
> and the register definitions were easy to verify empirically.
> 
> I have tested this driver on D1 with the video engine. There is no DT
> update patch here to avoid dependencies between series. The example in
> the binding is what will go in the D1 DT.

So such driver is needed for H616 for GPU? Or is power domain handling 
different there?

Best regards,
Jernej

> 
> [1]:
> https://github.com/mangopi-sbc/tina-linux-5.4/blob/main/drivers/soc/sunxi/g
> pu_domain.c [1]:
> https://github.com/mangopi-sbc/tina-linux-5.4/blob/main/drivers/soc/sunxi/p
> m_domains.c
> 
> 
> Samuel Holland (2):
>   dt-bindings: power: Add Allwinner D1 PPU
>   soc: sunxi: Add Allwinner D1 PPU driver
> 
>  .../power/allwinner,sun20i-d1-ppu.yaml        |  54 +++++
>  drivers/soc/sunxi/Kconfig                     |   9 +
>  drivers/soc/sunxi/Makefile                    |   1 +
>  drivers/soc/sunxi/sun20i-ppu.c                | 207 ++++++++++++++++++
>  .../power/allwinner,sun20i-d1-ppu.h           |  10 +
>  5 files changed, 281 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml create
> mode 100644 drivers/soc/sunxi/sun20i-ppu.c
>  create mode 100644 include/dt-bindings/power/allwinner,sun20i-d1-ppu.h