[PATCH 2/5] arm64: dts: imx8mp: Adjust EQoS reset comment on i.MX8MP DHCOM

[Marek Vasut]

Fix copy-paste error in the EQoS reset comment, align with SoM schematic.
No functional change.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: Marek Vasut <marex at denx.de>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: kernel at dh-electronics.com
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index cc8e086ff7b63..1471a17045f7a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -700,9 +700,9 @@ MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x22
 
 	pinctrl_ethphy0: dhcom-ethphy0-grp {
 		fsl,pins = <
-			/* ENET1_#RST Reset */
+			/* ENET_QOS_#RST Reset */
 			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
-			/* ENET1_#INT Interrupt */
+			/* ENET_QOS_#INT Interrupt */
 			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x22
 		>;
 	};
-- 
2.39.1